ORTEGUIL ORC 55 mitre trimmer, north Cumbria
Posted: Wed 10 Oct, 2018 11:29 pm
Vertical mitre machine with two high speed steel blades, mounted on vertical cast dovetail slides. These slides are fully adjustable to take out any wear that may take place over many years of use.
The front fence on the mitre machines is adjustable to cope with out square walls when cutting dado rails, skirting boards etc.
This machine is ideal for manufacture of small picture and mirror frames.
Standard Equipment ORC55:
One pair of H.S.S. knives
Length stop assembly
Plastic guard
Operating lever
Two hex key wrenches
Weight is approx 16kg price new is £495+VAT
Maximum cutting width is 55mm
Collect near Penrith/ Carlisle £200 ONO e mail for pics
This is an old but well cared for machine which operates smoothly with no sloppiness in the linkages
[img][http://rs129.pbsrc.com/albums/p211/trex ... t=clip/img]
The front fence on the mitre machines is adjustable to cope with out square walls when cutting dado rails, skirting boards etc.
This machine is ideal for manufacture of small picture and mirror frames.
Standard Equipment ORC55:
One pair of H.S.S. knives
Length stop assembly
Plastic guard
Operating lever
Two hex key wrenches
Weight is approx 16kg price new is £495+VAT
Maximum cutting width is 55mm
Collect near Penrith/ Carlisle £200 ONO e mail for pics
This is an old but well cared for machine which operates smoothly with no sloppiness in the linkages
[img][http://rs129.pbsrc.com/albums/p211/trex ... t=clip/img]