Page 1 of 1

WANTED & FOR SALE: Laminator

Posted: Wed 06 Feb, 2019 12:35 pm
by lawrieh
I have a Hotpress Jetmounter 43" for sale.

The are a few very small nicks (not cuts) in the top roller but they are very shallow and short and dont impact whatsoever. If it wasn't for them I would say it's almost "as new".

Its very well built and a real tank. I think I also have instructions/DVD for it.

I also have a quantity of over laminate films (around 915mm wide) you can have with it. The only reason I am getting rid of it is that I need to laminate 48" wide panels occasionally. I manage this just with the 43" machine by running through twice offset left and right on each run but its not ideal.

If you have a 1200mm or 1400mm hot or cold laminator for sale please let me know, I am looking to buy or swap.

The Jetmounter is available when I can get a larger machine.

Welcome to view in SW9 London.

It fitted in my car (estate) when I bought it so you might be able to collect if your car is suitable. I may be able to deliver if you are reasonably local.

£750 cash.

I will try an upload pictures shortly.

FOR SALE: Laminator Hotpress Jetmounter JM44

Posted: Fri 22 Feb, 2019 4:48 pm
by lawrieh
Some photos at last.

Complete with training DVD, Instructions, original fuse (wow!), front feed bar and a full roll of 1040mm x 25 metre 75μ Gloss Pressure Sensitive Laminate. A 50μ (micron) gloss clear PVC film that is coated one side with a highly oxidation, UV and blanch resistant permanent pressure sensitive adhesive. This adhesive is laminated with a 72gsm PE coated siliconised release liner."

Very light use, very well cared for... Could possibly deliver locally. Top comes off the base, I managed to get it in the back of my Passat Estate easily enough...
20190222_153333.jpg
20190222_153333.jpg (1.61 MiB) Viewed 2536 times
20190222_153217.jpg
20190222_153217.jpg (1.45 MiB) Viewed 2536 times
20190222_153046.jpg
20190222_153046.jpg (628.3 KiB) Viewed 2536 times
20190222_154128.jpg
20190222_154128.jpg (1.29 MiB) Viewed 2536 times

Re: WANTED & FOR SALE: Laminator

Posted: Tue 26 Feb, 2019 10:18 am
by lawrieh
Price reduced to £650 and I've found some extra over laminate to throw in.

Re: WANTED & FOR SALE: Laminator

Posted: Tue 05 Mar, 2019 12:16 pm
by andyb333
Hi,
Is this still available? Could be interested.

Andy 07947 360460

Re: WANTED & FOR SALE: Laminator

Posted: Wed 06 Mar, 2019 7:52 pm
by lawrieh
Hi Andy
yes it is, I will give you a call in the morning..

LAwrie

Re: WANTED & FOR SALE: Laminator

Posted: Fri 08 Mar, 2019 2:09 pm
by lawrieh
Sold...