Ademco heat vacuum press and Keencut Rondo.

Buying/selling equipment
Situations wanted/vacant
Forum rules
All sellers are required to have a forum profile that identifies them clearly. (Such as - name, surname, location, business name et cetera)
Post Reply
Justintime
Posts: 1868
Joined: Sat 26 Sep, 2015 8:48 am
Location: West Wales
Organisation: George The Framer LLP
Interests: Gardening, design, electronic music, good food and beverages.
Contact:

Ademco heat vacuum press and Keencut Rondo.

Post by Justintime »

A friend has taken over a storage unit from a retired framer and been left both of these pieces of equipment.
The Ademco press looks like it could do with a test/service as it's been left with its top cover off, suggesting it needs fixing. It looks like a dial is missing too. On the plus side it has a pump with it.
The Keencut looks like it may be missing some parts and needs a good clean.
If there's any interest in either of these pm me or I guess they'll head to landfill..
Any offers considered.
They are both in Cardigan, West Wales.
Justin
Attachments
IMG_20190301_150303.jpg
IMG_20190301_150303.jpg (4.28 MiB) Viewed 1315 times
IMG_20190301_150752.jpg
IMG_20190301_150752.jpg (523.44 KiB) Viewed 1315 times
Justin George GCF(APF)
Insta: georgetheframer
Justintime
Posts: 1868
Joined: Sat 26 Sep, 2015 8:48 am
Location: West Wales
Organisation: George The Framer LLP
Interests: Gardening, design, electronic music, good food and beverages.
Contact:

Re: Ademco heat vacuum press and Keencut Rondo.

Post by Justintime »

I meant recycled not landfilled, of course.
Justin George GCF(APF)
Insta: georgetheframer
User avatar
prospero
Posts: 11492
Joined: Tue 05 Jun, 2007 4:16 pm
Location: Lincolnshire

Re: Ademco heat vacuum press and Keencut Rondo.

Post by prospero »

I had an Ademco press which I have just junked. :(

If yours will pull a vacuum to over 20psi and the elements all work then you might have good machine. They are a bit sensitive
though and if the lid has been taken off then there's a good chance the seal is compromised.

The missing dial is a timer which can easily be replaced. :wink:
Watch Out. There's A Humphrey About
Post Reply