Workshop Equipment For Sale - Everything Needed for Start Up
Posted: Mon 01 Jul, 2019 2:35 pm
We are closing our business down in August, and as such have a full professional workshops load of equipment for sale. We are a high street bespoke framers so although everything has had regular use, nothing has been used in a volume framing set up. All are in excellent working condition.
We would prefer to sell to someone who is just setting up, particularly the main 4 pieces of equipment (CMC, underpinner, morso and glass cutter). Its a great opportunity to get everything in one swoop!
The main items are as follows:
Gunnar F1 Hybrid CMC - From new 6 years old - never missed a beat
Morso F (plus left arm, waste chute and 4 sets of blades)
Alfamaccine Minigraf 4 (3 position) (plus wings, stand, double head clamp (lion code 9507), single head clamp, 5, 7, 10, 12 & 15mm wedge heads, foot pedal and various V Nails)
Keencut Excalibur 5000 (plus plenty of spares)
Bambi BB24V 50lpm silent compressor
2x Lion mountboard storage carts on wheels
Glass holder - we stand our normal 4x3 sheets of float on here, with our boxes of AR70 next to it, both fit perfectly
Large wooden workbench - 10'x5.5' (the large plan chest fits underneath)
Racking workbench -154x192cm - this could be reconfigured as its collapsible
Large Plan chest (internal 120x89cm, external (w)135x(d)95.5x(h)71cm)
Plan chest (internal 87x62cm, external (w)99x(d)70x(h)83cm)
L Shape shabby / rustic topped counter - overall area size 149(w)x203cm
I-Bar heat sealer / shrink wrapper
All the small items: tab guns, staplers etc
There may be a selection of mouldings, glass etc
Manneqins - 2 male, 1 female
Some office furniture
2x desk top card racks
Various other items such as microwave, small fridge etc
Some IKEA display shelving (mainly the MALM range)
IKEA glass cabinet
Everything is still being used currently, but will be starting to pack up at the end of July / Beginning of August.
We need the items to be out of the way asap, ideally being collected between 9 Aug - 16 Aug
Everything is located in our shop in Bolsover (S44), and is easily accessible with a van - unfortunately we are unable to deliver.
Drop me a PM if anything is of interest.
Thank you!
We would prefer to sell to someone who is just setting up, particularly the main 4 pieces of equipment (CMC, underpinner, morso and glass cutter). Its a great opportunity to get everything in one swoop!
The main items are as follows:
Gunnar F1 Hybrid CMC - From new 6 years old - never missed a beat
Morso F (plus left arm, waste chute and 4 sets of blades)
Alfamaccine Minigraf 4 (3 position) (plus wings, stand, double head clamp (lion code 9507), single head clamp, 5, 7, 10, 12 & 15mm wedge heads, foot pedal and various V Nails)
Keencut Excalibur 5000 (plus plenty of spares)
Bambi BB24V 50lpm silent compressor
2x Lion mountboard storage carts on wheels
Glass holder - we stand our normal 4x3 sheets of float on here, with our boxes of AR70 next to it, both fit perfectly
Large wooden workbench - 10'x5.5' (the large plan chest fits underneath)
Racking workbench -154x192cm - this could be reconfigured as its collapsible
Large Plan chest (internal 120x89cm, external (w)135x(d)95.5x(h)71cm)
Plan chest (internal 87x62cm, external (w)99x(d)70x(h)83cm)
L Shape shabby / rustic topped counter - overall area size 149(w)x203cm
I-Bar heat sealer / shrink wrapper
All the small items: tab guns, staplers etc
There may be a selection of mouldings, glass etc
Manneqins - 2 male, 1 female
Some office furniture
2x desk top card racks
Various other items such as microwave, small fridge etc
Some IKEA display shelving (mainly the MALM range)
IKEA glass cabinet
Everything is still being used currently, but will be starting to pack up at the end of July / Beginning of August.
We need the items to be out of the way asap, ideally being collected between 9 Aug - 16 Aug
Everything is located in our shop in Bolsover (S44), and is easily accessible with a van - unfortunately we are unable to deliver.
Drop me a PM if anything is of interest.
Thank you!