I'm hoping that someone out there has a morso gathering dust that they'd be willing to sell parts from.
I'm looking for a right hand cast table for my morso machine, with a metric scaled divided beam and stop, with all the fixings to attach it, of course!
I also need to buy a pivot screw/bolt for the pedal, and a height stop lock.
If anyone has a left hand table too, I'd be interested in that as well.
Thank you!
Morso - right cast table and pivot screw/bolt for pedal wanted.
Forum rules
All sellers are required to have a forum profile that identifies them clearly. (Such as - name, surname, location, business name et cetera)
All sellers are required to have a forum profile that identifies them clearly. (Such as - name, surname, location, business name et cetera)
-
- Posts: 48
- Joined: Wed 08 Oct, 2014 7:33 am
- Location: Eastbourne environs
- Organisation: framing
- Interests: London, boats, bikes, ghosts
Re: Morso - right cast table and pivot screw/bolt for pedal wanted.
Funnily enough...my LH pedal bolt gave it up this week.
No thread left after 28 years!
I have just put a handy bolt and nut in its place and is fine.
This may help you little
No thread left after 28 years!
I have just put a handy bolt and nut in its place and is fine.
This may help you little
-
- Posts: 53
- Joined: Sun 22 Nov, 2020 9:22 pm
- Location: Perth
- Organisation: Barry Allan Scott Fine Art
- Interests: Drawing, painting, sculpture, hiking, camping, kayaking.
Re: Morso - right cast table and pivot screw/bolt for pedal wanted.
Weird how that happens!
It's got a wobbly bolt holding the pedal on just now... which might need to stay if I can't get a sacrificial machine or someone willing to sell a few parts off an old machine. I got a wee fright at how expensive the bits are!
It's got a wobbly bolt holding the pedal on just now... which might need to stay if I can't get a sacrificial machine or someone willing to sell a few parts off an old machine. I got a wee fright at how expensive the bits are!