Mega Equipment clearance Read this.

[GL@profile]

I have been instructed to clear the following secondhand equipement within the next 7 days (!).
Please make a bid for any items which are of interest to you, or the equipment parcel in its entirety.
The highest bidders for each item will be invited to view, pay for, and collect,their items. (Please note: as you are placing bids “sight unseen” in the unlikely event that an item does not satisfy your requirements you will be able to retract your bid).
There will be no element of auction on the day(i.e. each item will be sold to the best bid received by 5pm Friday 18th April.) Please Fax bids to 01892 515507.
Successful bidders will be invited to view and collect their items from Kent/Southeast London area.
All items as seen.
All agreed bid prices + VAT.
Cash or cheque on collection with receipted invoice.

DUE TO THE EXTRAORDINARY NATURE OF THIS CLEARANCE I GENUINELY BELIEVE THERE WILL BE SOME UNREPEATABLE BARGAINS

1X Omga v365 Mitre saw
15x moulding trolleys
1 x wet glue laminator
1x nit press for the above
1x85 lady pack “l” sealer and heater tunnel, polyolafin
1x side sealer shrink wrap machine
1x heater tunnel for the above
1 x brevetti mitre saw
1x in line label applicator
1x small adpak “l” sealer
1x heater tunnel for the above, PVC
4x strapping machines
1x hpc screw compressor
4x 3602 autobytes
1x atlas screw compressor with built in dryer
4x mini grapg memory pinning machines
1x minigraph memory pinning machine spares or repair.
1x cut master mitre saw
1x 2kd pinning machine
3x morso
5x pallet trucks
1x inline strapping machine, 3phase.
4x metal assembly benches
1x 65 lady pack “l”sealer and heater tunnel, polyolafin
1x riveter with stock of rivets and “d”rings (1000, s)
1 box 16/1 brass screw eyes, aprox 100,000 pcs
100x metal post pallets
1x staff clocking in, out machine
1000,s assorted prints
1000,s assorted mounts
15x moulding trolleys
1 x wet glue laminator
1x nit press for the above
1x85 lady pack “l” sealer and heater tunnel, polyolafin
1x side sealer shrink wrap machine
1x heater tunnel for the above
1 x brevetti mitre saw
1x in line label aplicator
1x small adpak “l” sealer
1x heater tunnel for the above, PVC
4x strapping machines
1x hpc screw compressor
4x 3602 autobytes
1x atlas srew compressor with built in dryer
4x mini grapg memory pinning machines
1x minigraph memory pinning machine spares or repair.
1x cut master mitre saw
1x 2kd pinning machine
3x morso
5x pallet trucks
1x inline strapping machine, 3phase.
4x metal assembly benches
1x 65 lady pack “l”sealer and heater tunnel, polyolafin
1x riveter with stock of rivets and “d”rings (1000, s)
1 box 16/1 brass screw eyes, aprox 100,000 pcs
100x metal post pallets
1x staff clocking in, out machine
1000,s assorted prints
1000,s assorted mounts
1x 1170 dot matrix printer
10x dell desk top pc, s with screens
10x symbol scanner with charger base and spare batteries
3x overhead projectors
1x omga 235 auto mitre saw, with auto feed system
2x epsom lq 2080 dot matrix printers
1x samsung desk top printer
1x lexmark desk top printer
1x epsom lq 2180 dot matrix printer
4x sets of warehouse steps, assorted sizes
5x autobyte 2400 spares or repair,
6x morso spares or repair
2x warehouse pallet scales
1x large 4 bag dust extractor unit, 3 phase.
1x man up fork lift cage.
+ Miles of boxed wedges, Glass, Moulding, backing,
ETC

Please contact Guy Lambert for more details. 01892 515506

[osgood]

Wow, what a strange way to sell stuff!
Bidding on items, sight unseen and almost no details in the descriptions? Several items in the list duplicated?

Who is the person who has posted the list and who does he/she represent?

Is this some sort of scam? April fools day has come and gone already!

[GL@profile]

Hello Ormond,

Thank you for your Enquiry,
This is no sort of a scam.
All the equipment is genuinely for sale to buyers who can travel and collect from Kent / South London.
Anyone who requires specific information is invited to E-mail me, and I will honestly supply any information that I can.

I agree , it is rather a strange way to sell so much equipment -- but due to the time constraints -- I thought I would offer it to the members of the Forum. It will be interesting to see the results.

As you ask.....
Profile Mouldings Ltd has been Supplying Picture Frame Moulding for @20 years to customers in Southeast England and the rest of the UK.
Some two years ago we acquired the rights and stock of Byron Mouldings.
I Own the Company.
We are new to the Forum but not to the Framing Industry.

Best Wishes
Guy Lambert Profile Mouldings Ltd (Tel 01892 515506)

[GL@profile]

I forgot to mention:
1. Reason for no descriptions -- the post would have been too long had I included them . Please E-mail me or call for any specific information required.
2. Reason for some duplication of the list is a cut and paste error by me -- apologies.
This is a genuine sale.

Best wishes
Guy Lambert -Profile Mouldings Ltd (Tel 01892 515506)

[bez7293]

Surely this system is open to abuse, wouldn't you say? If for example, you received ten bids of under £100 for something that was worth considerably more, whats to stop you not selling it at all? If you were to be questioned about it, you would say that it was sold for a higher sum.

I do hate to bring these points up, however, if you are as honest as you sound you would hopefully understand the public's concern.

Furthermore, when and if successful do you envisage contacting the lucky winners?

Thanks

[GL@profile]

Hi Bez,
Many thanks for your concerns.
The items in this sale are more likely to interest the trade than the public.

As I Hope I stated , this is not an auction ( It is, I guess, a sale by informal tender).
The successful bidders will be invited to inspect,pay for, and collect their items as soon as I have colated all the bids (hopefully by Tuesday next week).

The most anyone will be risking is the time, and costs, of a trip to the Kent / London borders.

Good Luck, I hope this answers your enquiries.
You (or anyone else) can call me on 01892 515506 and I will do my best to answer any other questions you may have.
Best wishes Guy Lambert Profile Mouldings Ltd

[Framerpicture]

Is it possible to view these items before putting in a bid?

[GL@profile]

Absolutely -- Please call me to arrange.

Thank you
Guy

[avantime]

Guy I see you have some autobyte machines - are they in working order?


Regards

hugh

[TTC]

I do hate to bring these points up, however, if you are as honest as you sound you would hopefully understand the public's concern.
Thanks

Having dealt with Guy for more years than I care to remember I can assure you that he is as honest as he sounds. I would have no hesitation in recommending Guy to anyone in the framing trade.

[GL@profile]

Many thanks TTC

The reference is much appreciated,
Who are you ?

[GL@profile]

Re Autobytes

From Memory 3 (possibly 4) working perfectly.
2 for spares/repair.

You are welcome to come and inspect them.
Please call me
thanks
Guy

[TTC]

Many thanks TTC

The reference is much appreciated,
Who are you ?

Now Guy, if I told you that you may feel that you had to buy me a drink.

Enough to say we both go back to the Magnolia/Scharf days and we have seen each other in the past week.

Other than that I prefer to remain just TTC.

[osgood]

Other than that I prefer to remain just TTC.

Don't you guys just love the cloak and dagger stuff! Sheeeeeeshh!

[prospero]

Enough to say we both go back to the Magnolia/Scharf days.....

Did you know agent KCA?

[Moglet]

And is Vic there?

[prospero]

The geese fly at midnight.

[osgood]

I wull say thees only wence!

[TTC]

Did you know agent KCA?

No I think he was disposed of before my time. Why, was he a friend of yours?

[prospero]

maybe so. It's must be 10 years since I've seen him and he was 'retired' then. He was one of the first reps I saw when I started and he continued to call regulary. Not always for the same company, but was with Scharf for a good few years.