We are selling some equipment as we have moved and now have more space restrictions.
Morso
The Morso is 12 months old and still under warranty. It was bought from Ashworth and Thompson and has only been used for domestic use (max 100 frames in its lifetime). It has always been housed in a centrally heated room and is in perfect condition and produces exemplary mitres. It has been oiled and maintained following the Morso guidelines. It is metric and has all guards, waste chute and a left hand extension (also from A&T). We would like to sell it for £950.
Framing table
We also have a superb and huge framing table with non-scratch, immensely tough surface with A0 storage below. We offer this for £150.
We also have a few packs of quality mouldings and slips, if interested.
We are located in Perthshire, Scotland. Please do not hesitate us contact me if you would like more info.
Cheers
Stoneswood
Morso and framing table for sale
Forum rules
All sellers are required to have a forum profile that identifies them clearly. (Such as - name, surname, location, business name et cetera)
All sellers are required to have a forum profile that identifies them clearly. (Such as - name, surname, location, business name et cetera)
- Mr Bevel
- Posts: 32
- Joined: Tue 13 Feb, 2007 10:01 pm
- Location: Cambridgeshire
- Organisation: workshop
- Interests: reading, politics, comedy, art
- Location: Cambridgeshire
Re: Morso and framing table for sale
Hi, could you give the exact dimensions of the table- also, any chance of any photos?
John
John
fortunately and unfortunately everything is connected
-
- Posts: 6
- Joined: Thu 12 Feb, 2009 11:44 am
- Location: Highlands (West Coast)
- Organisation: Highlands
- Interests: Furniture making, Framing, Sailing and Motor racing plus lots of others
Re: Morso and framing table for sale
Hello
Do you still have the Morso for sale?
May also be interested in the mouldings you have, what qty and price are you looking for?
Kind regards
Steve(new member over near Fort-William)
Do you still have the Morso for sale?
May also be interested in the mouldings you have, what qty and price are you looking for?
Kind regards
Steve(new member over near Fort-William)
-
- Posts: 3485
- Joined: Mon 25 Jun, 2007 5:43 pm
- Location: The Shire
- Organisation: An Urban Myth
- Interests: I'll let you know if I get my life back.
- Contact:
Re: Morso and framing table for sale
Welcome to the Forum, Steve!
........Áine JGF SGF FTB
.Briseann an dúchas trí shuiligh an chuit.
.Briseann an dúchas trí shuiligh an chuit.
Re: Morso and framing table for sale
Pictureman- £700 is below what I would like really as the Morso is as good as new (though I do realise it is one year old)
Steve- Yes! it is for sale and, if you pay the asking price, I would happily throw the mouldings in for free. There are approx x3 10ft packs of mixed mouldings and slips. Mostly unfinished beech and mixed black and white slips. All good quality from Arcadia and A&T.
Regarding the table, I will get some measurements and photos sorted asap.
Thanks for the interest folks!
Steve- Yes! it is for sale and, if you pay the asking price, I would happily throw the mouldings in for free. There are approx x3 10ft packs of mixed mouldings and slips. Mostly unfinished beech and mixed black and white slips. All good quality from Arcadia and A&T.
Regarding the table, I will get some measurements and photos sorted asap.
Thanks for the interest folks!
-
- Posts: 6
- Joined: Thu 12 Feb, 2009 11:44 am
- Location: Highlands (West Coast)
- Organisation: Highlands
- Interests: Furniture making, Framing, Sailing and Motor racing plus lots of others
Re: Morso and framing table for sale
Hello again
Thanks for the welcome Moglet!!
Now down to business!
When would the Morso be availabe for collection.
Also is it a two man lift onto a trailer?
As to the price how about £900 including the mouldings and I might be interested in the work bench.
Yours in anticipation
Steve
Thanks for the welcome Moglet!!
Now down to business!
When would the Morso be availabe for collection.
Also is it a two man lift onto a trailer?
As to the price how about £900 including the mouldings and I might be interested in the work bench.
Yours in anticipation
Steve
Re: Morso and framing table for sale
Hi Steve,
£900 for Morso and mouldings is a possibility. It is a two man lift, though I can help you onto the trailer at our end. We are away until early next week, but would be available after that. Thur pm would be best or next weekend.
The framing table work surface is 120x120cm and the same working height as a Casssese 88 (perfect working height to my mind). In addition, the table has fittings to attach a large mountcutter on one end. I have always used a Keencut Laser to great effect. The long measurement stick attaches to the table surface perfectly. There is also considerable A0 vertical storage below the working surface. The table is steel frame and is a very sturdy (and heavy) piece of furniture. The table top is resin (the same used for surgical surfaces to avoid scratches).
The mountcutter is also available if you wish to take it too- it is pretty old but produces great results. We can discuss this further if you are interested.
My email is mattgibson100@btinternet.com.
All the best
£900 for Morso and mouldings is a possibility. It is a two man lift, though I can help you onto the trailer at our end. We are away until early next week, but would be available after that. Thur pm would be best or next weekend.
The framing table work surface is 120x120cm and the same working height as a Casssese 88 (perfect working height to my mind). In addition, the table has fittings to attach a large mountcutter on one end. I have always used a Keencut Laser to great effect. The long measurement stick attaches to the table surface perfectly. There is also considerable A0 vertical storage below the working surface. The table is steel frame and is a very sturdy (and heavy) piece of furniture. The table top is resin (the same used for surgical surfaces to avoid scratches).
The mountcutter is also available if you wish to take it too- it is pretty old but produces great results. We can discuss this further if you are interested.
My email is mattgibson100@btinternet.com.
All the best
Re: Morso and framing table for sale
All items listed above now sold. Many thanks for all the interest.