Hi, Can anyone tell me the best way to clean glass at the first go when I put the picture into the frame I always have something stuck to the inside of the glass (dust) being the main culprit.
Regards Neil
clean glass
-
- Posts: 4
- Joined: Tue 21 Jun, 2011 3:05 pm
- Location: Livingston
- Organisation: Livingston
- Interests: gardening, DIY
Re: clean glass
Uh-oh - sounds like you've had some visits from flumbus convertere
http://theframersforum.com/viewtopic.ph ... 61&p=71848
.
http://theframersforum.com/viewtopic.ph ... 61&p=71848
.
- David McCormack
- Posts: 1442
- Joined: Tue 02 Aug, 2011 10:14 am
- Location: South Lakes
- Organisation: Framing
- Interests: Cycling, walking, darkroom photography and laughing a lot!
- Location: Cumbria
- Contact:
Re: clean glass
Yes, welcome to the world of flumbs!
Do you assemble your frame face down and then glass? Better to have the undermount/windowmount package face up and put the glass on top and then seal the whole thing with something like P90 tape. See this thread : http://theframersforum.com/viewtopic.php?f=6&t=4731
Do you assemble your frame face down and then glass? Better to have the undermount/windowmount package face up and put the glass on top and then seal the whole thing with something like P90 tape. See this thread : http://theframersforum.com/viewtopic.php?f=6&t=4731
"You know, there's a right and wrong way to do everything!"
Oliver Hardy.
https://www.instagram.com/davidaustinmccormack/
Oliver Hardy.
https://www.instagram.com/davidaustinmccormack/