Hi All,
Has anyone got/or come across a Hansen mitre guillotine? 2001 model. Because I cut a frame last night first time using this guillotine and two corners were excellent but two corners was way off with a gap at the bottom of the mitre and any thoughts on this?
They happen to be on the left hand mitre cut but this guillotine has s fixed fence not like the other ones where can move the angle so could it be the blades? It is a second hand machine off a retired guy but he said it was a great machine.
Any help would be great thanks in advance.
Adam
Guillotine help!
-
- Posts: 39
- Joined: Thu 17 Jan, 2013 9:01 pm
- Location: Huntingdon
- Organisation: A.M.B Framing
- Interests: Football watching and playing, British touring cars, world touring cars and motorsport in general.
- IFGL
- Posts: 3087
- Joined: Sun 06 May, 2012 5:27 pm
- Location: Sheffield UK
- Organisation: Inframe Gallery Ltd
- Interests: Films ,music and art, my wife and kids are pretty cool too.
- Location: Sheffield
- Contact:
Re: Guillotine help!
I have 2 Hansons, most of the bits on these machines are directly interchangeable with the morso, I am led to believe they actually are Morso parts on the machine, any adjustments you need to make are Identical to the morso, there is a lot of info on here about them.
-
- Posts: 39
- Joined: Thu 17 Jan, 2013 9:01 pm
- Location: Huntingdon
- Organisation: A.M.B Framing
- Interests: Football watching and playing, British touring cars, world touring cars and motorsport in general.
Re: Guillotine help!
Ok I didn't know that they were the same parts and ok I will look on this website see if I can find some more info out. Thanks for your help
- IFGL
- Posts: 3087
- Joined: Sun 06 May, 2012 5:27 pm
- Location: Sheffield UK
- Organisation: Inframe Gallery Ltd
- Interests: Films ,music and art, my wife and kids are pretty cool too.
- Location: Sheffield
- Contact:
Re: Guillotine help!
if you need any more help after searching through here, let me know and I will do my best to help.
-
- Posts: 39
- Joined: Thu 17 Jan, 2013 9:01 pm
- Location: Huntingdon
- Organisation: A.M.B Framing
- Interests: Football watching and playing, British touring cars, world touring cars and motorsport in general.
Re: Guillotine help!
This is my guillotine that is giving me a headache
- Attachments
-
- image.jpg (1.53 MiB) Viewed 3515 times
- IFGL
- Posts: 3087
- Joined: Sun 06 May, 2012 5:27 pm
- Location: Sheffield UK
- Organisation: Inframe Gallery Ltd
- Interests: Films ,music and art, my wife and kids are pretty cool too.
- Location: Sheffield
- Contact:
Re: Guillotine help!
OK that is not the models I have, I think that is a much older design , and completely different from the morso.
I do believe Mikey had this model, he might be able to shed some light on it, I think he has retired, worth asking though.
Just noticed you got it off a retiree, bet that was Mikey's guillotine.
I do believe Mikey had this model, he might be able to shed some light on it, I think he has retired, worth asking though.
Just noticed you got it off a retiree, bet that was Mikey's guillotine.
-
- Posts: 39
- Joined: Thu 17 Jan, 2013 9:01 pm
- Location: Huntingdon
- Organisation: A.M.B Framing
- Interests: Football watching and playing, British touring cars, world touring cars and motorsport in general.
Re: Guillotine help!
Yeah i thought it was an old one and I picked it up from Essex if that is where mickey lives. He is still on here at all? I thought about putting new blades on to see.
-
- Posts: 39
- Joined: Thu 17 Jan, 2013 9:01 pm
- Location: Huntingdon
- Organisation: A.M.B Framing
- Interests: Football watching and playing, British touring cars, world touring cars and motorsport in general.
Re: Guillotine help!
Yeah that's the one and I have emailed him hopefully he has some advice for me and thanks for your help too.