Dust of ages hand finish

Post examples...
Of framing styles or techniques that rocked your boat, and also of those that didn't
User avatar
David McCormack
Posts: 1442
Joined: Tue 02 Aug, 2011 10:14 am
Location: South Lakes
Organisation: Framing
Interests: Cycling, walking, darkroom photography and laughing a lot!
Location: Cumbria
Contact:

Dust of ages hand finish

Post by David McCormack »

A lot of my customers 'leave it to me'! which means I don't always know how frame finishes will turn out until I get the brushes, paint and wax out! It's a nightmare when they ask me to do the same again! That's the trouble with adding a bit of this and that into the paint mix and not keeping a record :Slap:

A nice simple finish I like is with white paint on obeche and rottenstone. After a couple of coats of white matt rub on some clear wax and before it dries dust with plenty of rottenstone and then buff up with a soft cloth. To tone down the effect you can rub some lime wax on and rub off again with the clear wax.
001.jpg
001.jpg (119.28 KiB) Viewed 20170 times
002.jpg
002.jpg (100.78 KiB) Viewed 20170 times
003.jpg
003.jpg (141.19 KiB) Viewed 20170 times
004.jpg
004.jpg (142 KiB) Viewed 20170 times
"You know, there's a right and wrong way to do everything!"
Oliver Hardy.
https://www.instagram.com/davidaustinmccormack/
User avatar
StevenG
Posts: 1147
Joined: Thu 31 Jan, 2013 8:01 am
Location: Tyrone, N.Ireland
Organisation: Featurepiece Frames
Interests: Movies, always trying to get things better, Wasting money on things I don't need, reading stuff on here, eating sandwiches & being thankful for the small things
Contact:

Re: Dust of ages hand finish

Post by StevenG »

Neat :clap: - Thanks for the quick guide too :D

I've done a few things too in the past where it's just trying a few things until I get something that I like, mostly pure luck if I'm honest but I don't reckon I could reproduce it again if I tried!! :Slap:
caro
Posts: 127
Joined: Wed 13 Feb, 2013 6:18 pm
Location: Willington near Bedford
Organisation: Manor Farm Studios
Interests: making stuff with wood, glass, metal, textiles, paint. Big friendly dogs.

Re: Dust of ages hand finish

Post by caro »

white frames are popular at the mo, nice one. and your work surface might sell as an abstract :lol:
User avatar
David McCormack
Posts: 1442
Joined: Tue 02 Aug, 2011 10:14 am
Location: South Lakes
Organisation: Framing
Interests: Cycling, walking, darkroom photography and laughing a lot!
Location: Cumbria
Contact:

Re: Dust of ages hand finish

Post by David McCormack »

It's not ready for sale yet.... I'm still working on it :giggle:
"You know, there's a right and wrong way to do everything!"
Oliver Hardy.
https://www.instagram.com/davidaustinmccormack/
Graysalchemy

Re: Dust of ages hand finish

Post by Graysalchemy »

I have moulding samples of my finishes on the wall and I have a corresponding spread sheet with the recipe. They are all coded with a reference corresponding to the moulding (s) and colours used. That way you know how it was made.
User avatar
Steve N
Posts: 2992
Joined: Sat 21 Jul, 2007 2:32 pm
Location: Somewhere Staple Hill Bristol
Organisation: Frontier Picture Frames ltd
Interests: Walking our retired Greyhound,art, falling asleep on sofa in front of the telly
Location: Now in Bristol
Contact:

Re: Dust of ages hand finish

Post by Steve N »

Greys wrote
"I have moulding samples of my finishes on the wall and I have a corresponding spread sheet with the recipe. They are all coded with a reference corresponding to the moulding (s) and colours used. That way you know how it was made."


You're too well organized to be a framer :giggle: :giggle:
Steve CEO GCF (020)
Believed in Time Travel since 2035

Proud to sell Ready Made Frames
http://www.frontierpictureframes.com
http://www.designerpicturemounts.com/
Graysalchemy

Re: Dust of ages hand finish

Post by Graysalchemy »

Not really, it just makes it easier. Hand finishing is usually a protracted process and if you have to muck about trying to remember how you did something then the profit will go out of the job. Also if you offer the frames to commercial clients they want consistent results.
User avatar
GeoSpectrum
Posts: 2151
Joined: Fri 01 Oct, 2010 11:49 am
Location: Lincolnshire
Organisation: Ashcraft Framing
Interests: Family, x-country skiing, wine, art, Jazz
Location: Gainsborough, Lincolnshire
Contact:

Re: Dust of ages hand finish

Post by GeoSpectrum »

Sorry to bump the thread but can anyone tell me what profile that is?
Alan Huntley
Ashcraft Framing
Bespoke Easels and Self-assembly tray frames
http://www.ashcraftframing.co.uk
User avatar
David McCormack
Posts: 1442
Joined: Tue 02 Aug, 2011 10:14 am
Location: South Lakes
Organisation: Framing
Interests: Cycling, walking, darkroom photography and laughing a lot!
Location: Cumbria
Contact:

Re: Dust of ages hand finish

Post by David McCormack »

Sure, Rose & Hollis A77 obeche, page 17, 45mm wide with a 14mm rebate.
"You know, there's a right and wrong way to do everything!"
Oliver Hardy.
https://www.instagram.com/davidaustinmccormack/
User avatar
GeoSpectrum
Posts: 2151
Joined: Fri 01 Oct, 2010 11:49 am
Location: Lincolnshire
Organisation: Ashcraft Framing
Interests: Family, x-country skiing, wine, art, Jazz
Location: Gainsborough, Lincolnshire
Contact:

Re: Dust of ages hand finish

Post by GeoSpectrum »

Thank you very much :D
Alan Huntley
Ashcraft Framing
Bespoke Easels and Self-assembly tray frames
http://www.ashcraftframing.co.uk
Not your average framer
Posts: 11013
Joined: Sat 25 Mar, 2006 8:40 pm
Location: Devon, U.K.
Organisation: The Dartmoor Gallery
Interests: Lost causes, saving and restoring old things, learning something every day
Location: Glorious Devon

Re: Dust of ages hand finish

Post by Not your average framer »

Out of curiosity what do you use for your white paint? I find that not all paints are the same.

I like the durability of a good quality acrlic paint, but I don't like a glossy finish when it dries, so I like to mix an acrykic paint white a chalky emulsion. I don't measure the exact ratio, but it's just gesswork of an approximate 50 / 50 mix.

I may just be me, but I feel that 100% acrylic paints can sometimes look and feel a be plasticy. I'm always looking for the muted and slightly dull effect where the frame has an old look and feel about it. Another somewhat similar moulding is Simons M0099B which may be of some interest, if you ever need something similar in a smaller profile.

Another colour which looks quite nice with rottenstone is a sort of off black made from brown and black. I make it with Craig and Rose clove brown (or was it spice brown) and black. Be careful, as you mix it, it does not need as much black as you might think!

BTW, a very nice job too! :clap: :clap: :clap:
Mark Lacey

“Life is short. Art long. Opportunity is fleeting. Experience treacherous. Judgement difficult.”
― Geoffrey Chaucer
User avatar
prospero
Posts: 11492
Joined: Tue 05 Jun, 2007 4:16 pm
Location: Lincolnshire

Re: Dust of ages hand finish

Post by prospero »

One of my first ventures into hand finishing was very similar to the OP example. I even used the same profile. :D

I used white acrylic gesso which dries fast and is as hard as nails. This stuff is nice and thick so it holds brushmarks. I would typically gesso an entire length and brush along the length in one go to form 'tramlines'. Later I got into stippling and other textures. A thin wash of a colour, brushed on quickly an wiped off leaves a very subtle tint to the surface. I would then rub back with wax an wire wool. This imparts a soft grey tone to the whole thing as the solvent in the wax mixes with particles of the steel.

I don't use white acrylic gesso any more. The good old ripple paint is better. Easier to sand. But what I do use often is Black acrylic gesso. :P One of my favs is to apply it using criss-cross brushstrokes. Gives a subtle but striking effect. So much more interesting than a smooth, flat finish. Adding light washes over the black also gives nice results. Thin white over black leaves a deep blue cast.
Watch Out. There's A Humphrey About
User avatar
David McCormack
Posts: 1442
Joined: Tue 02 Aug, 2011 10:14 am
Location: South Lakes
Organisation: Framing
Interests: Cycling, walking, darkroom photography and laughing a lot!
Location: Cumbria
Contact:

Re: Dust of ages hand finish

Post by David McCormack »

Not your average framer wrote:Out of curiosity what do you use for your white paint?
I use mostly Farrow & Ball sample pots but also have a few colours from the Plaka range. This job was F&B Tallow 203. I must get round to trying some of the acrylics and the white ripple that Prospero favours.
"You know, there's a right and wrong way to do everything!"
Oliver Hardy.
https://www.instagram.com/davidaustinmccormack/
User avatar
prospero
Posts: 11492
Joined: Tue 05 Jun, 2007 4:16 pm
Location: Lincolnshire

Re: Dust of ages hand finish

Post by prospero »

It comes in a different shaped pot now. :P

Image
Watch Out. There's A Humphrey About
markw

Re: Dust of ages hand finish

Post by markw »

Vacuum cleaner bag is a good source of distressing dust....
Graysalchemy

Re: Dust of ages hand finish

Post by Graysalchemy »

Not in my house unless you want dog hairs and bits of crisps. :giggle: :giggle:
User avatar
prospero
Posts: 11492
Joined: Tue 05 Jun, 2007 4:16 pm
Location: Lincolnshire

Re: Dust of ages hand finish

Post by prospero »

If I did the vac-bag thing I could do mohair frames. Both myself and my glamorous feline assistant are very hairy. If I had saved all the hair that went up the hoover I could have knitted another cat.
Watch Out. There's A Humphrey About
Not your average framer
Posts: 11013
Joined: Sat 25 Mar, 2006 8:40 pm
Location: Devon, U.K.
Organisation: The Dartmoor Gallery
Interests: Lost causes, saving and restoring old things, learning something every day
Location: Glorious Devon

Re: Dust of ages hand finish

Post by Not your average framer »

Graysalchemy wrote:and bits of crisps. :giggle: :giggle:
Ah, scratch and sniff handfinished frames! Available in Cheese and Onion, Smokey Bacon, etc, etc.

:giggle: :giggle:
Mark Lacey

“Life is short. Art long. Opportunity is fleeting. Experience treacherous. Judgement difficult.”
― Geoffrey Chaucer
markw

Re: Dust of ages hand finish

Post by markw »

You wanted to add character haha
User avatar
IFGL
Posts: 3087
Joined: Sun 06 May, 2012 5:27 pm
Location: Sheffield UK
Organisation: Inframe Gallery Ltd
Interests: Films ,music and art, my wife and kids are pretty cool too.
Location: Sheffield
Contact:

Re: Dust of ages hand finish

Post by IFGL »

I know a framer who used some mushed up ginger biscuit to fill a knot hole in a frame, thankfully he is now a ex framer.
Post Reply