Where can I find this moulding?

Estelle · Post by **Estelle** » Thu 15 Dec, 2016 11:37 am

Hi. I'm trying to locate a source for the moulding profile below (unfinished wood). I've searched the Internet but without success and my supplier doesn't stock. Can anyone help?

Post by **prospero** » Thu 15 Dec, 2016 12:19 pm

I remember that. I say remember as it hasn't been available for a few years.

If you are sneaky you can construct a very similar shape from three profiles.
The middle is just a flat so no problem there. The inner and outer might be more difficult to
match exactly but you should be able to get very close.

Alternatively there are several members with milling facilities.

(not me)

Would still make it in three parts though.

Estelle · Post by **Estelle** » Thu 15 Dec, 2016 12:22 pm

Many thanks for that. It's certainly an idea I hadn't thought of. Hope my skills are up to it!

David McCormack · Post by **David McCormack** » Thu 15 Dec, 2016 12:56 pm

Something similar? Rose & Hollis A121 approx 65mm wide obeche.

: A121.jpg (50.79 KiB) Viewed 12645 times

Estelle · Post by **Estelle** » Thu 15 Dec, 2016 1:13 pm

Thank you for that! It's slightly bigger than my sample, which is 50mm but will probably do the job and it's certainly the profile I'm after!

Framemaker Richard · Post by **Framemaker Richard** » Thu 15 Dec, 2016 1:27 pm

The smaller R&H version is A271 - about 49mm wide and looks identical to your sample

David McCormack · Post by **David McCormack** » Thu 15 Dec, 2016 1:35 pm

Also A271 which is about 48mm wide.

: A271.jpg (42.23 KiB) Viewed 12631 times

David McCormack · Post by **David McCormack** » Thu 15 Dec, 2016 1:42 pm

Richard got there before me

Not like Prospero to miss something in the Rose & Hollis catalogue?

Estelle · Post by **Estelle** » Thu 15 Dec, 2016 2:10 pm

That's perfect!!! Catalogue ordered. They say they'll have a website up and running in the New Year so that'll make life easier! Many thanks.

David McCormack · Post by **David McCormack** » Thu 15 Dec, 2016 2:20 pm

A website, wow

Estelle · Post by **Estelle** » Thu 15 Dec, 2016 2:23 pm

I know - had to laugh when I saw someone on here, said that Rose and Hollis didn't think the Internet would ever take off, hence no website!!!

Jamesnkr · Post by **Jamesnkr** » Thu 15 Dec, 2016 3:13 pm

R&H will email you a catalogue if you ask.

Post by **prospero** » Thu 15 Dec, 2016 3:47 pm

Sorry. I misestimated the scale. I do know A121 and A271 but the inner part looked different and
I mistook it for a bigger one I used to use.

Carry on.....

Estelle · Post by **Estelle** » Thu 15 Dec, 2016 4:18 pm

No worries! Thanks for taking the trouble.

The Framers Forum

Where can I find this moulding?

Where can I find this moulding?

Re: Where can I find this moulding?

Re: Where can I find this moulding?

Re: Where can I find this moulding?

Re: Where can I find this moulding?

Re: Where can I find this moulding?

Re: Where can I find this moulding?

Re: Where can I find this moulding?

Re: Where can I find this moulding?

Re: Where can I find this moulding?

Re: Where can I find this moulding?

Re: Where can I find this moulding?

Re: Where can I find this moulding?

Re: Where can I find this moulding?