Hi.
After years of hassling my boss to up grade the mount cutter, they have finally agreed.
One small problem. Can i get the mat pro down a flight of stairs and round a corner?
All i can find spec wise is the overall size including feet.
If any has one and has a mo, could they please measure the overall board size not including feet.
Cheers
Andy
Valiani mat pro 120, dimensions without feet.
-
- Posts: 3
- Joined: Tue 17 May, 2016 7:55 am
- Location: Cambridge
- Organisation: The Lawson Gallery
- Interests: Art
- Merlin
- Posts: 1538
- Joined: Thu 05 Jun, 2003 5:50 pm
- Location: Cornwall
- Organisation: Merlin Mounts
- Interests: Aviation
Re: Valiani mat pro 120, dimensions without feet.
The bed size without the stand is:
Length (L to R) is 1600. Height (B to top) is 1150. Depth is around 300mm.
Place the Y arm into the middle of the bed and lock it in position. Tuck the two large cables inderneath the Y arm and tape into position.
Be VERY CAREFUL of the cables and air lines at the top of the table. Lots of snagging hazards
Hope that helps
Length (L to R) is 1600. Height (B to top) is 1150. Depth is around 300mm.
Place the Y arm into the middle of the bed and lock it in position. Tuck the two large cables inderneath the Y arm and tape into position.
Be VERY CAREFUL of the cables and air lines at the top of the table. Lots of snagging hazards
Hope that helps
John GCF
-
- Posts: 3
- Joined: Tue 17 May, 2016 7:55 am
- Location: Cambridge
- Organisation: The Lawson Gallery
- Interests: Art
Re: Valiani mat pro 120, dimensions without feet.
Thanks Merlin