Hello All

Say hello, and tell us a little about yourself.
Post Reply
MarkR32
Posts: 92
Joined: Wed 29 Nov, 2017 12:41 pm
Location: Shepshed, Leicestershire
Organisation: G58 Framing
Interests: Rugby, Food, Family, Framing

Hello All

Post by MarkR32 »

Hi all,

I'm Mark, based over in 'sunny' Leicestershire. Fairly new to framing myself but have been around the profession for a number of years thanks to family.

I am setting up shop with the aid of a trusty Morso F, Morso underpinner (to be upgrade), keencut mount cutter and lots and lots of cut fingers ..

hopefully I have found a friendly forum where advice can be given and received :D
Top
poliopete
Posts: 798
Joined: Mon 04 Apr, 2016 7:13 am
Location: The Wash
Organisation: Annie Lou Fine Framing
Interests: Caring for my wife, Picture Framing and Natural History

Re: Hello All

Post by poliopete »

Welcome to the FF

It's good to hear you have some good kit :D not so good to hear about your cut fingers though :(
Top
Jamesnkr

Re: Hello All

Post by Jamesnkr »

Get yourself a vertical panel cutter too.
Top
User avatar
prospero
Posts: 11613
Joined: Tue 05 Jun, 2007 4:16 pm
Location: Lincolnshire

Re: Hello All

Post by prospero »

Welcome Mark. :D
Watch Out. There's A Humphrey About
Top
Jude
Posts: 1
Joined: Mon 20 Mar, 2017 5:36 pm
Location: Dorset
Organisation: Dorsetframers
Interests: Art. Painting framing and gallivanting around galleries.

Re: Hello All

Post by Jude »

Yes highly recommend a vertical wall cutter, less finger damage!!
Top
Post Reply

Return to “Introductions”