Second Hand Ultimat Gold price

Get help and framing advice from the framing community
Post Reply
grahamg
Posts: 54
Joined: Fri 30 Oct, 2009 1:28 pm
Location: aberdeen
Organisation: GGD
Interests: design & dancing

Second Hand Ultimat Gold price

Post by grahamg »

Hi all,

It's been ages since I've been here! I have the opportunity to buy an ultimat gold mount cutter from a local framer who is shutting down. It was purchased second hand by them, and I believe it has some slight issues with not squaring properly, which I hope would be fixable. Is £500 a good price that I've been offered? I believe it's in good condition otherwise and comes with all parts, manual etc.

Thanks in advance,

Graham
User avatar
prospero
Posts: 11492
Joined: Tue 05 Jun, 2007 4:16 pm
Location: Lincolnshire

Re: Second Hand Ultimat Gold price

Post by prospero »

A decent offer. :D It's like buying a car. Have you test driven it?

The squaring issue may be due to the previous owner not knowing how to set it up properly. Or it may have been
used roughly. Either way is a lever to get a better deal. :wink:
Watch Out. There's A Humphrey About
grahamg
Posts: 54
Joined: Fri 30 Oct, 2009 1:28 pm
Location: aberdeen
Organisation: GGD
Interests: design & dancing

Re: Second Hand Ultimat Gold price

Post by grahamg »

Thanks Prospero,

Also - do I really need one? I only make frames for myself and as gifts, but I want them to be as good as possible. I currently have a Logan Simplex Elite, but I don't like the mdf board, which I have already damaged slightly, and get some hooking etc when cutting thicker mounts. The appeal of the ultimat gold is the aluminium base, but I don't actually know much about them.
User avatar
prospero
Posts: 11492
Joined: Tue 05 Jun, 2007 4:16 pm
Location: Lincolnshire

Re: Second Hand Ultimat Gold price

Post by prospero »

Personally, I don't really care for the metal construction of the Keencut. Seems a bit unfriendly and cold. :cry:
I much prefer the nice MDF base of my C&H. :D

But that's just me. :lol:
Watch Out. There's A Humphrey About
Justintime
Posts: 1868
Joined: Sat 26 Sep, 2015 8:48 am
Location: West Wales
Organisation: George The Framer LLP
Interests: Gardening, design, electronic music, good food and beverages.
Contact:

Re: Second Hand Ultimat Gold price

Post by Justintime »

A quick look on ebay says that the last three to sell went for £350, £450 and £650, all in "very good condition". So I would have thought there is some wiggle room there.
If it's a hobby or your dream job, is there anything more exciting to spend money on than "new" tools??
I have the Fletcher equivalent and love it. They're all only as good as the user and how well they're set up.
Replacing blades frequently solves all sorts of issues.
I love the stops, but I know a few older framers who still use their 1980's mountcutters without stops and are quite happy. They just have to draw lots of pencil lines and cut free hand, which is a skill in itself.
"If it ain't broke..."?
Justin George GCF(APF)
Insta: georgetheframer
Post Reply