Wanted - Chevron Display

Buying/selling equipment
Situations wanted/vacant
Forum rules
All sellers are required to have a forum profile that identifies them clearly. (Such as - name, surname, location, business name et cetera)
Post Reply
mbaister
Posts: 23
Joined: Sun 14 Jan, 2018 10:44 am
Location: Glasgow
Organisation: Martin Baister
Interests: oil painting, photography, framing

Wanted - Chevron Display

Post by mbaister » Wed 05 Feb, 2020 9:49 pm

Looking for a display solution for chevrons, small workshop where wall space is at a premium.

User avatar
Steve N
Posts: 2680
Joined: Sat 21 Jul, 2007 2:32 pm
Location: Bath, in the wild wild west
Organisation: Frontier Picture Frames
Interests: Walking our retired Greyhound,art, falling asleep on sofa in front of the telly
Location: Bath, Somerset
Contact:

Re: Wanted - Chevron Display

Post by Steve N » Thu 06 Feb, 2020 7:58 am

Make your own, cover some board with hook display fabric, and pop a frame around it, do a few of these , with maybe gold moulding on one, silver on another , black on another etc, then you can just lean them against the wall, simple job done :clap: :nod:
Steve CEO GCF (020)
Believed in Time Travel since 2035

Proud to sell Ready Made Frames
http://www.frontierpictureframes.com
http://www.designerpicturemounts.com/

poliopete
Posts: 820
Joined: Mon 04 Apr, 2016 7:13 am
Location: The Wash
Organisation: Annie Lou Fine Framing
Interests: Caring for my wife, Picture Framing and Natural History

Re: Wanted - Chevron Display

Post by poliopete » Thu 06 Feb, 2020 8:11 am

I think most framers make their own and if you do as Steve suggests you can do as I did once, hinge them on the wall so they fold back out of the way.

Peter.

Timh
Posts: 274
Joined: Fri 26 Apr, 2013 2:48 pm
Location: mid wales
Organisation: kingswood frames and mirors
Interests: framing and framing history manufacture of mouldings and decorated frames

Re: Wanted - Chevron Display

Post by Timh » Thu 06 Feb, 2020 9:16 am

Hi
I have a tower display which I was looking to sell
it is black fabric and a beech wood trim
5 sides at 12 inch wide per side
also spins
bought from Selwyns

mbaister
Posts: 23
Joined: Sun 14 Jan, 2018 10:44 am
Location: Glasgow
Organisation: Martin Baister
Interests: oil painting, photography, framing

Re: Wanted - Chevron Display

Post by mbaister » Thu 13 Feb, 2020 10:47 pm

Hi, sorry for the late reply, I am potentially interested, how much would you be looking for, and would there be the possibility of sending up it north?

mbaister
Posts: 23
Joined: Sun 14 Jan, 2018 10:44 am
Location: Glasgow
Organisation: Martin Baister
Interests: oil painting, photography, framing

Re: Wanted - Chevron Display

Post by mbaister » Thu 13 Feb, 2020 10:47 pm

Hi, sorry for the late reply, I am potentially interested, how much would you be looking for, and would there be the possibility of sending up it north?

Timh
Posts: 274
Joined: Fri 26 Apr, 2013 2:48 pm
Location: mid wales
Organisation: kingswood frames and mirors
Interests: framing and framing history manufacture of mouldings and decorated frames

Re: Wanted - Chevron Display

Post by Timh » Fri 14 Feb, 2020 8:29 am

Hi
I did send a message
they are £500 plus vat and delivery new from Selwyns
I would be ok with £200 ex vat and delivery
it's in great condition and could send up flat to be re assembled

I will check carriage but would expect it to be about £15
let me know
Tim
01938 554985

Timh
Posts: 274
Joined: Fri 26 Apr, 2013 2:48 pm
Location: mid wales
Organisation: kingswood frames and mirors
Interests: framing and framing history manufacture of mouldings and decorated frames

Re: Wanted - Chevron Display

Post by Timh » Fri 14 Feb, 2020 8:30 am

ah. reply sent to someone else!
anyone interested, give me a call or PM me

Post Reply