Complete Workshop
Forum rules
All sellers are required to have a forum profile that identifies them clearly. (Such as - name, surname, location, business name et cetera)
All sellers are required to have a forum profile that identifies them clearly. (Such as - name, surname, location, business name et cetera)
- JohnMcafee
- Posts: 1145
- Joined: Sun 10 Oct, 2010 9:58 am
- Location: Belfast
- Organisation: Scenes
- Interests: Picture Framing
Putting the world to rights - Location: Belfast
- Contact:
Complete Workshop
Bespoke Workshop
Printer – Epsom stylus pro 9890 - £1,000
Rotatrim Professional M54 paper trimmer - £200
Paper roll wall dispenser - £100
Paper roll Storage Cart - £120
Canvas stretcher - £150
Keencut oval mount and glass cutter – with accessory kit - £50
Omar narrow stapler – 4097.16 Used - £100
Omar narrow stapler – 4097.16 virtually new in box - £190
Omar wide canvas stapler 50.16 – 4-16mm – seen very little use - £150
Omar Flexi stapler – 5.3 - 15mm flexi points - £150
Computerised vacuum bed mount cutter – Tru cut Elan – with computer and stand - £3,500
Cassesse 276 underpinner with spare logic valves, hammer and main piston (pneumatic pin driver) - £450
Jun-air Compressor – 35 litre tank (ample for our workshop with hand tools/underpinner/CMC) - £350
Flat bed press 22x26 Ademco - £50
Hot press - dry tac jet mounter - 34inches with variety of laminating materials - £350
Wall mounted rolls rack - £90
Gummed craft tape 2/3/4 inch
Variety of self adhesive tapes – ph7/70 etc.
Variety of Acrylic panels for frames - £250
Alphamachine Guillotine- fillet pro trim cutter – mitre cuts slips up to 16mm wide - £150
Morso F – 48979 – manufactured 1990 excellent condition– includes 3 sets of blades and 3 spare springs - £550 SOLD
Excalibur 5000 – multi function – glass/MDF/Board cutter - £450
All equipment has been regularly calibrated and well maintained. Inspection encouraged.
Everything is priced to sell, I am not interested in haggling, unless you are making an offer for the lot
Printer – Epsom stylus pro 9890 - £1,000
Rotatrim Professional M54 paper trimmer - £200
Paper roll wall dispenser - £100
Paper roll Storage Cart - £120
Canvas stretcher - £150
Keencut oval mount and glass cutter – with accessory kit - £50
Omar narrow stapler – 4097.16 Used - £100
Omar narrow stapler – 4097.16 virtually new in box - £190
Omar wide canvas stapler 50.16 – 4-16mm – seen very little use - £150
Omar Flexi stapler – 5.3 - 15mm flexi points - £150
Computerised vacuum bed mount cutter – Tru cut Elan – with computer and stand - £3,500
Cassesse 276 underpinner with spare logic valves, hammer and main piston (pneumatic pin driver) - £450
Jun-air Compressor – 35 litre tank (ample for our workshop with hand tools/underpinner/CMC) - £350
Flat bed press 22x26 Ademco - £50
Hot press - dry tac jet mounter - 34inches with variety of laminating materials - £350
Wall mounted rolls rack - £90
Gummed craft tape 2/3/4 inch
Variety of self adhesive tapes – ph7/70 etc.
Variety of Acrylic panels for frames - £250
Alphamachine Guillotine- fillet pro trim cutter – mitre cuts slips up to 16mm wide - £150
Morso F – 48979 – manufactured 1990 excellent condition– includes 3 sets of blades and 3 spare springs - £550 SOLD
Excalibur 5000 – multi function – glass/MDF/Board cutter - £450
All equipment has been regularly calibrated and well maintained. Inspection encouraged.
Everything is priced to sell, I am not interested in haggling, unless you are making an offer for the lot
"A little learning is a dangerous thing"
(Also known as John, the current forum administrator)
(Also known as John, the current forum administrator)
- JohnMcafee
- Posts: 1145
- Joined: Sun 10 Oct, 2010 9:58 am
- Location: Belfast
- Organisation: Scenes
- Interests: Picture Framing
Putting the world to rights - Location: Belfast
- Contact:
Rotatrim Professional M54 paper trimmer - £200
54 inch cutting length
"A little learning is a dangerous thing"
(Also known as John, the current forum administrator)
(Also known as John, the current forum administrator)
- JohnMcafee
- Posts: 1145
- Joined: Sun 10 Oct, 2010 9:58 am
- Location: Belfast
- Organisation: Scenes
- Interests: Picture Framing
Putting the world to rights - Location: Belfast
- Contact:
Printer – Epsom stylus pro 9890 - £1,000
Printer has seen little use -
Total Pages - 833
Total Pages - 833
"A little learning is a dangerous thing"
(Also known as John, the current forum administrator)
(Also known as John, the current forum administrator)
- JohnMcafee
- Posts: 1145
- Joined: Sun 10 Oct, 2010 9:58 am
- Location: Belfast
- Organisation: Scenes
- Interests: Picture Framing
Putting the world to rights - Location: Belfast
- Contact:
Wall mounted rolls rack - £90
Keeps rolls tidily on the wall
"A little learning is a dangerous thing"
(Also known as John, the current forum administrator)
(Also known as John, the current forum administrator)
- JohnMcafee
- Posts: 1145
- Joined: Sun 10 Oct, 2010 9:58 am
- Location: Belfast
- Organisation: Scenes
- Interests: Picture Framing
Putting the world to rights - Location: Belfast
- Contact:
Paper roll Storage Cart - £120
Assorted printing papers
"A little learning is a dangerous thing"
(Also known as John, the current forum administrator)
(Also known as John, the current forum administrator)
- JohnMcafee
- Posts: 1145
- Joined: Sun 10 Oct, 2010 9:58 am
- Location: Belfast
- Organisation: Scenes
- Interests: Picture Framing
Putting the world to rights - Location: Belfast
- Contact:
Canvas stretcher - £150
Canvas Stretcher, 3ft wide - comes with manual
Some stretcher moulding available
Some stretcher moulding available
"A little learning is a dangerous thing"
(Also known as John, the current forum administrator)
(Also known as John, the current forum administrator)
- JohnMcafee
- Posts: 1145
- Joined: Sun 10 Oct, 2010 9:58 am
- Location: Belfast
- Organisation: Scenes
- Interests: Picture Framing
Putting the world to rights - Location: Belfast
- Contact:
Omer Pneumatic Staple Guns
Several pneumatic guns
"A little learning is a dangerous thing"
(Also known as John, the current forum administrator)
(Also known as John, the current forum administrator)
- JohnMcafee
- Posts: 1145
- Joined: Sun 10 Oct, 2010 9:58 am
- Location: Belfast
- Organisation: Scenes
- Interests: Picture Framing
Putting the world to rights - Location: Belfast
- Contact:
Computerised vacuum bed mount cutter – Tru cut Elan – with computer and stand - £3,500
Very rugged CMC
"A little learning is a dangerous thing"
(Also known as John, the current forum administrator)
(Also known as John, the current forum administrator)
- JohnMcafee
- Posts: 1145
- Joined: Sun 10 Oct, 2010 9:58 am
- Location: Belfast
- Organisation: Scenes
- Interests: Picture Framing
Putting the world to rights - Location: Belfast
- Contact:
Cassesse 276 underpinner - £450
Cassesse 276 underpinner
Comes with spare logic valves, hammer and main piston (pneumatic pin driver)
A sturdy and reliable machine
Comes with spare logic valves, hammer and main piston (pneumatic pin driver)
A sturdy and reliable machine
"A little learning is a dangerous thing"
(Also known as John, the current forum administrator)
(Also known as John, the current forum administrator)
- JohnMcafee
- Posts: 1145
- Joined: Sun 10 Oct, 2010 9:58 am
- Location: Belfast
- Organisation: Scenes
- Interests: Picture Framing
Putting the world to rights - Location: Belfast
- Contact:
Jun-air Compressor - £350
Jun-air Compressor – 35 litre tank (ample for our workshop with hand tools/underpinner/CMC)
"A little learning is a dangerous thing"
(Also known as John, the current forum administrator)
(Also known as John, the current forum administrator)
- JohnMcafee
- Posts: 1145
- Joined: Sun 10 Oct, 2010 9:58 am
- Location: Belfast
- Organisation: Scenes
- Interests: Picture Framing
Putting the world to rights - Location: Belfast
- Contact:
Flat bed press 22x26 Ademco - £50
A real heavy beast, but very useful to have in a bespoke framing workshop
"A little learning is a dangerous thing"
(Also known as John, the current forum administrator)
(Also known as John, the current forum administrator)
- JohnMcafee
- Posts: 1145
- Joined: Sun 10 Oct, 2010 9:58 am
- Location: Belfast
- Organisation: Scenes
- Interests: Picture Framing
Putting the world to rights - Location: Belfast
- Contact:
Hot press - dry tac jet mounter - 34inches with variety of laminating materials - £350
Comes with variety of laminating materials - £350
"A little learning is a dangerous thing"
(Also known as John, the current forum administrator)
(Also known as John, the current forum administrator)
- JohnMcafee
- Posts: 1145
- Joined: Sun 10 Oct, 2010 9:58 am
- Location: Belfast
- Organisation: Scenes
- Interests: Picture Framing
Putting the world to rights - Location: Belfast
- Contact:
Alphamachine Guillotine- fillet pro trim cutter – mitre cuts slips up to 16mm wide - £150
The Rolls-Royce of slip cutters
"A little learning is a dangerous thing"
(Also known as John, the current forum administrator)
(Also known as John, the current forum administrator)
- JohnMcafee
- Posts: 1145
- Joined: Sun 10 Oct, 2010 9:58 am
- Location: Belfast
- Organisation: Scenes
- Interests: Picture Framing
Putting the world to rights - Location: Belfast
- Contact:
Morso F – 48979 – manufactured 1990 excellent condition– includes 3 sets of blades and 3 spare springs - £550
Morso F – 48979 – manufactured 1990 excellent condition and well maintained – includes 3 sets of blades and 3 spare springs
"A little learning is a dangerous thing"
(Also known as John, the current forum administrator)
(Also known as John, the current forum administrator)
- JohnMcafee
- Posts: 1145
- Joined: Sun 10 Oct, 2010 9:58 am
- Location: Belfast
- Organisation: Scenes
- Interests: Picture Framing
Putting the world to rights - Location: Belfast
- Contact:
Re: Complete Workshop
Now Sold: -
Morso
Omer pneumatic, narrow staple gun
Cassese 276 pneumatic underpinner
Morso
Omer pneumatic, narrow staple gun
Cassese 276 pneumatic underpinner
"A little learning is a dangerous thing"
(Also known as John, the current forum administrator)
(Also known as John, the current forum administrator)
- A Few More Words
- Posts: 182
- Joined: Thu 28 Jan, 2010 9:24 pm
- Location: Carlow, Ireland
- Organisation: Fine Framers
- Interests: Photography, Travel
- Location: Carlow, Ireland
- Contact:
Re: Complete Workshop
Hi John
Have you seen my PMs to you re taking some of these items?
Thanks
Tom
Have you seen my PMs to you re taking some of these items?
Thanks
Tom
Fine Framers
www.fineframers.com
www.fineframers.com
-
- Posts: 2
- Joined: Thu 21 Jul, 2022 10:09 am
- Location: Edinburgh
- Organisation: Detail Framing Studio
- Interests: Picture framer by day, ceramicist by night
Re: Complete Workshop
Is the Excalibur 5000 the short or longer version?
- JohnMcafee
- Posts: 1145
- Joined: Sun 10 Oct, 2010 9:58 am
- Location: Belfast
- Organisation: Scenes
- Interests: Picture Framing
Putting the world to rights - Location: Belfast
- Contact:
Re: Complete Workshop
Items still available
All other items have gone to good homes
- TrueCut computerised mount cutter £3250
- Omer flexi-point pneumatic point driver £100
- Omer narrow staple pneumatic driver £150
All other items have gone to good homes
"A little learning is a dangerous thing"
(Also known as John, the current forum administrator)
(Also known as John, the current forum administrator)