Hi,
i will need to fix a large frame weighing around 50-60kg flush against a wall.
What would be the best fixings to use
MAny thanks
Michael
hanging fittings
-
- Posts: 55
- Joined: Wed 07 May, 2014 6:53 pm
- Location: Wickford
- Organisation: Compo mouldings ltd
- Interests: Framing
-
- Posts: 1298
- Joined: Thu 23 Sep, 2004 8:31 pm
- Location: Detroit, Michigan USA
- Organisation: minoxy, LLC
- Interests: non-fiction knowledge
- Contact:
Re: hanging fittings
Wall anchors. They will vary depending on the type of wall the art is being installed on.
For the frame, the stronger the better for the hardware. Multi- screw metal plates with secure welded on rings (AKA "D" hooks) or bent plates with holes. Do not skimp on the quality or size of the screws.
For the frame, the stronger the better for the hardware. Multi- screw metal plates with secure welded on rings (AKA "D" hooks) or bent plates with holes. Do not skimp on the quality or size of the screws.
Jerome Feig CPF®
http://www.minoxy.com
http://www.minoxy.com
-
- Posts: 1880
- Joined: Sat 26 Sep, 2015 8:48 am
- Location: West Wales
- Organisation: George The Framer LLP
- Interests: Gardening, design, electronic music, good food and beverages.
- Contact:
Re: hanging fittings
Justin George GCF(APF)
Insta: georgetheframer
Insta: georgetheframer
-
- Posts: 1880
- Joined: Sat 26 Sep, 2015 8:48 am
- Location: West Wales
- Organisation: George The Framer LLP
- Interests: Gardening, design, electronic music, good food and beverages.
- Contact:
-
- Posts: 55
- Joined: Wed 07 May, 2014 6:53 pm
- Location: Wickford
- Organisation: Compo mouldings ltd
- Interests: Framing
Re: hanging fittings
thank you all
-
- Posts: 347
- Joined: Fri 26 Apr, 2013 2:48 pm
- Location: mid wales
- Organisation: kingswood frames and mirors
- Interests: framing and framing history manufacture of mouldings and decorated frames
Re: hanging fittings
Split batten would work as well if there's enough room in the rebate