If it's to glue two sheets of plastic, or correx together, I'd be inclined to use a contact adhesive.
You can get some easily at Screwfix.
Spread the glue evenly over each board, leave it to dry and then press both together.
A problem piece/home...
-
vintage frames
- Posts: 1479
- Joined: Tue 12 Jun, 2012 6:05 pm
- Location: West Wales
- Organisation: https://www.dermotmcardle.co.uk/
- Interests: Making picture frames
- Contact:
-
Justintime
- Posts: 2256
- Joined: Sat 26 Sep, 2015 8:48 am
- Location: West Wales
- Organisation: George The Framer LLP
- Interests: Gardening, design, electronic music, good food and beverages.
- Contact:
Re: A problem piece/home...
Thanks Dermot. Hot glue was going to be problematic with the size of it and it going off so quickly. I'll try that.
Justin George GCF(APF)
Insta: georgetheframer
Insta: georgetheframer