Hi,
*** This is the Mark II version of my self-engineered Cassese 88/89 Underpinner extension arms. The change was due to the original aluminium angle not being precisely 90% - in fact they varied from piece as a result of the poor quality of my supplier (who claimed they were within ISO standards). Because of the way I used them myself, I didn't notice this (neither did some other customers), but one customer found the original quite problematic (the aluminium plate didn't support the moulding everywhere it should) - and I've taken on board the feedback. The new design is completely flat - no angle involved - just flat, flat, flat, premium aluminium. ***
I'm an artist, framer (20+ years), enjoy engineering, and trying to solve problems.
Unable to buy extension arms for my Cassese 88, after years of getting by without them, I decided to make some. I've made them very precisely with some custom-made jigs - so I can make more if anyone is interested...
They're available to buy (fully returnable if not satisfied) on :-
Ebay - https://www.ebay.co.uk/itm/226515120442
Any feedback welcome.
Cassese CS88/89 custom-made Extension Arms Mk II
Forum rules
All sellers are required to have a forum profile that identifies them clearly. (Such as - name, surname, location, business name et cetera)
All sellers are required to have a forum profile that identifies them clearly. (Such as - name, surname, location, business name et cetera)
-
- Posts: 1
- Joined: Wed 30 Oct, 2024 11:46 pm
- Location: Aberdeen
- Organisation: Michael38tivity
- Interests: Artist, framing, DIY