I purchased a Jetmounter some years ago, and I need some more glossy film for it, but as this is an occasional purchase I can't remember where I previously sourced these - I have a feeling it was Ashworth and Thompson, but can't be sure. Can someone advise me a supplier of this or something similar that would do the same job please.
Jetmounter overlays
-
Ultima Thule
- Posts: 82
- Joined: Tue 30 Sep, 2008 9:50 pm
- Location: scotland
- Organisation: retail framer
- Interests: reading ,real ale, music
Jetmounter overlays
You do not have the required permissions to view the files attached to this post.
-
Steve Goodall
- Posts: 840
- Joined: Thu 08 May, 2008 4:22 pm
- Location: Up North
- Organisation: Happily Retired - working for beer now
- Interests: Gothic Punk / Man City / Photography...
Re: Jetmounter overlays
That is quite an old label, but the basic product specs are as follows...
This is a 50 micron / pressure sensitive / polypropylene or O.P.P. film as the label describes it this is a "standard" gloss - rather than a "high" / "super"/ "Ultra" gloss.
The manufacturer is Drytac and this was branded as a Hot Press product (though it requires no heat and is for use with cold roller laminators).
A good starting point would be to give Drytac a quick call & ask where you can buy rolls of "50 micron / pressure sensitive / polypropylene film"
They will be able to recommend a dealer for you. They are based in Bristol - 0117 958 6500.
This is a 50 micron / pressure sensitive / polypropylene or O.P.P. film as the label describes it this is a "standard" gloss - rather than a "high" / "super"/ "Ultra" gloss.
The manufacturer is Drytac and this was branded as a Hot Press product (though it requires no heat and is for use with cold roller laminators).
A good starting point would be to give Drytac a quick call & ask where you can buy rolls of "50 micron / pressure sensitive / polypropylene film"
They will be able to recommend a dealer for you. They are based in Bristol - 0117 958 6500.
Your too late I'm afraid - I retired in April 2024 
-
Ultima Thule
- Posts: 82
- Joined: Tue 30 Sep, 2008 9:50 pm
- Location: scotland
- Organisation: retail framer
- Interests: reading ,real ale, music
Re: Jetmounter overlays
Thanks Steve, once again... I'll follow this up.