Complete Workshop for Sale

[huntvambo]

Complete picture framing workshop with all equipment, tools and supplies. All but the HGP220 were bought new from Framers Equipment or Lion when I first set up my picture framing business and is only for sale now due to my recent retirement. Everything was still in use until recently and is in good working order and well maintained.

I'll shortly be listing this on ebay, a full set of photo's, list of moulding and mountboard available on request.

Morso F Mitre Guillotine, metric RH measuring scale, LH moulding support, blade guard and waste chute and 3 sets of genuine Morso blades with safety box, instruction manual.
Cassese CS88 manual underpinner with a good selection of genuine Cassese V-nails, spare chutes, A+ 10mm V-nails and service kit, instruction manual.
Keencut Ulimate Gold mountcutter with measuring arm, margin guide and box of gold tipped Tech D blades, instruction manual.
Fletcher 3100 Sheet Material Cutter, 4 interchangeable cutting heads (glass, acrylic, MDF and boards) with some spare blades and glass wheels, 2 flip stops for accurate repeat cutting, instruction manual.
Hot Press HGP220 with compressor, foam blanket, roll of dry mounting tissue, roll of gloss (lustre) film, roll of clear release film, instruction manual.
Keencut Oval 6 mountcutter with full craftsmanship kit, spare blades, instruction manual.
Fletcher Manual Point Drivers, FrameMaster (Black), FlexiMaster (Green), box of rigid points, box of glazier points, box of flexi points, Fletcher PullMate tool.
Scotch ATG 700 tape applicator with rolls of ATG double sided tape.
Nielsen 6 sided moulding display tower and 2 moulding display boards.
Moulding Support Stand, adjustable height, assist with handling long lengths of moulding on either the Morso or underpinner.
A wide variety of all the tapes required, gummed hinging, self-adhesive hinging, heavy duty bonding, frame sealing, etc.
A wide section of D-Rings (small, standard, 2 hole), mirror plates (various sizes), screw eyes, gummed cloth hangers, sawtooth hangers, turnbuttons, spring clips, canvas offsets (different heights), corner plates, frame bumpers (wool felt and clear dome), picture wire, picture cord (No.1, No.2), various wood screws.
Canvas stretcher pliers and heavy duty manual stapler with staples.
Variety of FrameTek EconoSpace Spacers.
Textile and needlework mounting, MicroStitch tag gun (green), FineFabric tag gun (red) with spare needles and variety of tags, stainless steel T-pins, selection of needles and threads for lacing.
Selection of raw moulding wood dyes and polishes, corner fillers, varnishes.
Selection of mount decoration paints, inks and pastels, with Huff ruling pen and Longridge corner marking guide.
HandyWrap handle and 6 rolls of film.
Multiple full lengths of quality moulding, mostly Lion or Wessex (Mono, Domino, Vermount, bare oak, etc.), lots of useable of offcuts (2m, 2.5m).
Multiple full sheets of Larson Juhl mountboard and lots of useable offcuts.
Float glass, 7 sheets 4’x3’
MDF, 3 sheets 4’x3’
If it isn’t listed, I’ve probably got it!

[avantime]

Is the Mount cutter still available?

[huntvambo]

Is the Mount cutter still available?

PM'ed you Avantime

[huntvambo]

All framing equipment has now been sold