What Wizard software version are you using???
What Wizard software version are you using???
Hi
Question to all Wizard Users - What software version are you using??
I am on 5.3 and have been for a long while. Have been told since last June new software was imminent.
Thanks
Question to all Wizard Users - What software version are you using??
I am on 5.3 and have been for a long while. Have been told since last June new software was imminent.
Thanks
-
- Posts: 1951
- Joined: Mon 09 Jan, 2006 12:06 am
- Location: Penzance Cornwall UK
- Organisation: Moonshine Framing Penzance
- Interests: 4 or 5 ...
- Location: West Cornwall, UK
- Contact:
5.3 here.
Considering the debossing kit in a half hearted sort of way too. Not sure what sort of call there would be for debossing over the shop counter, other than corporate, unless we pushed it, but a debossed line instead of V-Groove is a lot quicker and might be more subtle. imho they should stick a pen in it Might be good for putting folds in boxes too.
Considering the debossing kit in a half hearted sort of way too. Not sure what sort of call there would be for debossing over the shop counter, other than corporate, unless we pushed it, but a debossed line instead of V-Groove is a lot quicker and might be more subtle. imho they should stick a pen in it Might be good for putting folds in boxes too.
Both of those are rather old - 5.4 was released in October of 2006, and 5.5 was released back in August of 2007. I'd double check with Sam on that, and I'll check over here to see what the situation is - sometimes we hold international releases a bit later in order for the translations and such to catch up, but there's no way it'd be a couple of years out of date with the US version.
-
- Posts: 996
- Joined: Wed 30 Nov, 2005 10:03 am
- Location: Llanwrtyd Wells
- Organisation: Neuadd Bwll Framing
- Interests: Does running a framing business leave any time for interests?
- Location: Llanwrtyd Wells
- Contact:
-
- Posts: 1951
- Joined: Mon 09 Jan, 2006 12:06 am
- Location: Penzance Cornwall UK
- Organisation: Moonshine Framing Penzance
- Interests: 4 or 5 ...
- Location: West Cornwall, UK
- Contact:
-
- Posts: 996
- Joined: Wed 30 Nov, 2005 10:03 am
- Location: Llanwrtyd Wells
- Organisation: Neuadd Bwll Framing
- Interests: Does running a framing business leave any time for interests?
- Location: Llanwrtyd Wells
- Contact:
Only in the prefs settings, I think.kev@frames wrote:mike, has 5.5.1a got a metric/imperial toggle in mat designer, or is it still only available via the default settings ?
It's a shame it's not possible to mix units when entering them. Cutting a mat to put a 6 x 4 inch photo into a 300 x 240 mm frame means doing the maths. I thought that was what computers were for.
-
- Posts: 1951
- Joined: Mon 09 Jan, 2006 12:06 am
- Location: Penzance Cornwall UK
- Organisation: Moonshine Framing Penzance
- Interests: 4 or 5 ...
- Location: West Cornwall, UK
- Contact:
-
- Posts: 83
- Joined: Thu 28 Apr, 2005 11:16 am
- Location: Leicester
- Organisation: Framers Corner
- Interests: .
- Location: Leicester, England
- Contact:
Kev
Just tried to call but guess you are busy enjoying the sunshine this lovely Friday afternoon!
Just to let you know we decided to skip the 5.4 upgrade as there were only minor changes which didn't affect our customers, but we did write to you all last Nov asking if you wanted the 5.5 upgrade (in with the info about the debossing kit you have been thinking about!)
We decided to do upgrades this was rather than sending them automatically becuase we have over 100 machines being used and inevitably half the discs we were sending weren't getting used!
I am sending you a 5.5 disc out today, enjoy your weekend.
Sam
Just tried to call but guess you are busy enjoying the sunshine this lovely Friday afternoon!
Just to let you know we decided to skip the 5.4 upgrade as there were only minor changes which didn't affect our customers, but we did write to you all last Nov asking if you wanted the 5.5 upgrade (in with the info about the debossing kit you have been thinking about!)
We decided to do upgrades this was rather than sending them automatically becuase we have over 100 machines being used and inevitably half the discs we were sending weren't getting used!
I am sending you a 5.5 disc out today, enjoy your weekend.
Sam
-
- Posts: 1951
- Joined: Mon 09 Jan, 2006 12:06 am
- Location: Penzance Cornwall UK
- Organisation: Moonshine Framing Penzance
- Interests: 4 or 5 ...
- Location: West Cornwall, UK
- Contact: