Tigers Head

Share your CMC experiences.
Or seek help and advice
Post Reply
Keith
Posts: 119
Joined: Wed 20 Jul, 2005 12:19 am
Location: Cheltenham, Gloucestershire

Tigers Head

Post by Keith »

Hi All. (and John!!!)

Please find attached a embroidery of a tigers head I would like to try and get a cut from. I've tried in Corel Draw as per Johns Australian project but without success.
Do you think it's possible to get a cut from this photo (does the black background cause a problem) and if so please let me know how it's done. :head:

Thanks Keith
Attachments
Tigers Head 2.jpg
Tigers Head 2.jpg (86.82 KiB) Viewed 13235 times
Top
User avatar
Merlin
Posts: 1540
Joined: Thu 05 Jun, 2003 5:50 pm
Location: Cornwall
Organisation: Merlin Mounts
Interests: Aviation

Re: Tigers Head

Post by Merlin »

Hi Keith.

your design in PLT format is uploaded into the Design section, because .PLT formats are not allowed here.

Please see
http://theframersforum.com/viewtopic.php?f=27&t=4855

Hope it is what you require. If not then come on back
John GCF
Top
Post Reply

Return to “Discussion”