Morso EHT Relay Switch
-
EHT1
- Posts: 7
- Joined: Thu 29 Jul, 2010 1:17 pm
- Location: North West
- Organisation: World Of Frames
- Interests: Golf
Morso EHT Relay Switch
Morso Relay. It would be interesting to see how you guys test the relays in a EHT Morso. I know you can flick the small switch on the front of the relay to test it when its in the machine but is there any way of testing them when they are out of the machine. ANY HELP IS WELCOME
-
Mark Thornton
- Posts: 246
- Joined: Thu 08 Feb, 2007 4:00 pm
- Location: Yorkshire
- Organisation: Underpinner Spares
- Interests: Red wine - lots and lots of it.
- Location: Snaith, East Riding of Yorkshire
- Contact:
Re: Morso EHT Relay Switch
The switch contacts can be tested using a multimeter whilst flicking the test switch, or if its the solenoid you are wanting to check it should read about 1k ohms across the two coil contacts.
Or just buy another as they are cheap to replace.
Shameless plug:
http://underpinner-spares.co.uk/details ... emID=10061
Mark
Or just buy another as they are cheap to replace.
Shameless plug:http://underpinner-spares.co.uk/details ... emID=10061
Mark
https://www.underpinner-spares.co.uk Framing equipment spare parts - Easy online ordering