Need help finding a 'Box' or 'Float' moulding

CanvasChris · Post by **CanvasChris** » Fri 26 Aug, 2011 6:35 pm

Tried the usual suspects, Lion, Simons, Mainline etc but no luck. Client wants an Oak moulding... or oak finish as in the attached.

Quit like the flat edge to this one too.... the others have a rounded.

Any body know who does these?

Thanks in advance

Chris

Jonny2morsos · Post by **Jonny2morsos** » Fri 26 Aug, 2011 7:11 pm

What about an oak veneer used on its side? I have thought about using the Lion ones (think they are called Vermont) but never had time to experiment.

CanvasChris · Post by **CanvasChris** » Fri 26 Aug, 2011 7:28 pm

Thats a bit of a shout... have some in stock. Trouble is it's only 40mm and the float frame needs to be 50mm... like the lion and simons Boxx moulding.

framemaker · Post by **framemaker** » Fri 26 Aug, 2011 8:01 pm

If it is a plain oak frame then Rose and Hollis do a couple that maybe a suitable size, flat sections that can be used on their side. I am away at the moment and forgot to bring my catalogues with me

so can't tell you the dimensions or code numbers.

stcstc · Post by **stcstc** » Fri 26 Aug, 2011 8:26 pm

does it have to be wood

mainline do an oak polocore, which i have seen used and it lookes very good, and has that flat edge on it

CanvasChris · Post by **CanvasChris** » Fri 26 Aug, 2011 8:34 pm

Would like it to match the shape of rest of the colours I offer really.

Have used the Oak Polcore before and dont like it much.

Ricky · Post by **Ricky** » Sat 27 Aug, 2011 9:39 am

I sometimes use the L shaped pine or oak you can get from builders merchants or B & Q you can get it in various depths & thicknesses it stains & waxes well & look great when finished properly.

CanvasChris · Post by **CanvasChris** » Sat 27 Aug, 2011 10:42 am

Would like the moulding to match the rest of the colours and to be honest I don't have the flexibility in price to wax and stain etc.. too time consuming.

Lions range is great... just the Oak missing.

Image above was taken from Loxley's brochure so it must be available from somewhere...???

Roboframer · Post by **Roboframer** » Sat 27 Aug, 2011 11:20 am

Simons 'Oregon' range on page 73 are oak veneers, largest is 45mm wide (or 45mm deep if mitred on its side)

BaBaZa · Post by **BaBaZa** » Sat 27 Aug, 2011 12:08 pm

Those mouldings are our 54mm flat range of Polcore turned on their side

http://mainlinemouldings.com/index.php? ... .y=0&go=go

We have 2 oak finishes on Polcore. POL4211 is the latest

Ricky · Post by **Ricky** » Sat 27 Aug, 2011 12:47 pm

Give Norfolk Moulding a ring they'll have what you want if not they'll make it.
http://www.norfolkmouldings.com/

The Framers Forum

Need help finding a 'Box' or 'Float' moulding

Need help finding a 'Box' or 'Float' moulding

Re: Need help finding a 'Box' or 'Float' moulding

Re: Need help finding a 'Box' or 'Float' moulding

Re: Need help finding a 'Box' or 'Float' moulding

Re: Need help finding a 'Box' or 'Float' moulding

Re: Need help finding a 'Box' or 'Float' moulding

Re: Need help finding a 'Box' or 'Float' moulding

Re: Need help finding a 'Box' or 'Float' moulding

Re: Need help finding a 'Box' or 'Float' moulding

Re: Need help finding a 'Box' or 'Float' moulding

Re: Need help finding a 'Box' or 'Float' moulding