Enough lurking, this is what i can do.
-
- Posts: 37
- Joined: Mon 27 Dec, 2010 1:51 pm
- Location: Benson, Oxfordshire
- Organisation: Self
- Interests: Framing
Enough lurking, this is what i can do.
As a 'Garage Framer' or more like a 'Dining Room Table Framer' I have been lurking, admiring and sucking up good tips and advice for too long. I thought it was time I showed some of my work.
I am in the RAF and the aircraft I work on is 40 Years old this year. I commissioned a number of prints and have reaped the reward by getting a number of requests for framing.
This is one of the three designs. Not my choice of frame but it was what the customer wanted.
I am in the RAF and the aircraft I work on is 40 Years old this year. I commissioned a number of prints and have reaped the reward by getting a number of requests for framing.
This is one of the three designs. Not my choice of frame but it was what the customer wanted.
- Attachments
-
- ptf1.jpg (29.35 KiB) Viewed 8195 times
-
- Posts: 86
- Joined: Tue 02 Aug, 2011 9:10 pm
- Location: United Kingdom
- Organisation: none yet...
- Interests: not sure anymore ha ha
Re: Enough lurking, this is what i can do.


Anyway well done on the new hobbie / project. Looks good

- Keith Hewitt
- Posts: 1297
- Joined: Mon 28 Jun, 2004 9:49 am
- Location: BOLLINGTON - Macclesfield England
- Organisation: www.keithhewitt.co.uk
- Interests: Badminton, golf, gym, and exploring new places.
- Contact:
Re: Enough lurking, this is what i can do.
Well done PM Davies aka "Dining Room Framer "
It looks stunning
What's the 40 year old plane?
And welcome to the Forum
It looks stunning

What's the 40 year old plane?
And welcome to the Forum
Keith Hewitt
I have visited distributors and framers in over 100 countries - no two are the same.
https://www.youtube.com/watch?v=4XtrrWooYdg
I have visited distributors and framers in over 100 countries - no two are the same.
https://www.youtube.com/watch?v=4XtrrWooYdg
Re: Enough lurking, this is what i can do.
It's a Puma unless I am mistaken. Which I often am.
Welcome to the Forum PM.

Welcome to the Forum PM.

Watch Out. There's A Humphrey About
- pinkybanks
- Posts: 105
- Joined: Fri 29 Jan, 2010 7:06 pm
- Location: Stoke On Trent
- Organisation: Home based framer
- Interests: Keeping fit, framing, my children.
- Location: Stoke on Trent
- Contact:
Re: Enough lurking, this is what i can do.
Welcome, to the forum.
I'm currently on resettlement from the RAF and intended on becoming a full time framer although I've subsequently re-evaluated my plans, owing to a great job offer. Don't be put off by being a hobby framer, you've clearly got the skills, I think you'll soon discover that your services will be very much in demand on the Sqns.
I'm currently on resettlement from the RAF and intended on becoming a full time framer although I've subsequently re-evaluated my plans, owing to a great job offer. Don't be put off by being a hobby framer, you've clearly got the skills, I think you'll soon discover that your services will be very much in demand on the Sqns.
aim2frame Stoke picture framing http://aim2frame.moonfruit.com/
-
- Posts: 37
- Joined: Mon 27 Dec, 2010 1:51 pm
- Location: Benson, Oxfordshire
- Organisation: Self
- Interests: Framing
Re: Enough lurking, this is what i can do.
Excellent new on the jobfront pinkybanks. You are right, I get alot of work from the Sqns, sort of a captive audience and I must be doing something right because they keep coming back for more. I woll post some more of my efforts if anyone is interested? It is mostly of the Military Aviation variety which I haven't seen much of on here.
Re: Enough lurking, this is what i can do.
Well there's been some, but like everything else, if it's not unusual regards either image or framing, it's not going to get posted.pmdavies33 wrote: Military Aviation variety which I haven't seen much of on here.
http://theframersforum.com/viewtopic.ph ... 93&p=38475
http://theframersforum.com/viewtopic.php?f=11&t=4308
-
- Posts: 37
- Joined: Mon 27 Dec, 2010 1:51 pm
- Location: Benson, Oxfordshire
- Organisation: Self
- Interests: Framing
Re: Enough lurking, this is what i can do.
Thanks Roboframer. From your links I stumbled on Merlin Mounts where I can get mounts for framing cigarette cards, It is also nice to see some different framing techniques for Military Aviation. I would say 80% of my custom is aircraft related pictures, not always.
- Attachments
-
- Eds Medal.JPG (48.11 KiB) Viewed 8044 times
-
- Silhouette.JPG (54.32 KiB) Viewed 8044 times
Re: Enough lurking, this is what i can do.
I ould say you are doing all the right things. You have a captive audience and low overheads, that makes perfect business sense.
Keep up the good work.

Keep up the good work.


- Jonny2morsos
- Posts: 2231
- Joined: Wed 12 Mar, 2008 10:28 pm
- Location: Lincs
- Organisation: Northborough Framing
- Interests: Fly Fishing, Photography and Real Ale.
- Location: Market Deeping
Re: Enough lurking, this is what i can do.
There is a guy at RAF Wattisham with a shop on the base! I think he left the service due to injury and they let him have the premises to work from at favourable rates.
-
- Posts: 37
- Joined: Mon 27 Dec, 2010 1:51 pm
- Location: Benson, Oxfordshire
- Organisation: Self
- Interests: Framing
Re: Enough lurking, this is what i can do.
Unfortunately space is at a premium here at RAF Benson. The fortunate thing about operating form the dining room is that atleast the Mrs still gets to see me! The unfortunate thing though is the setting up, tidying away and the mess!!
- GeoSpectrum
- Posts: 2172
- Joined: Fri 01 Oct, 2010 11:49 am
- Location: Lincolnshire
- Organisation: Ashcraft Framing
- Interests: Family, x-country skiing, wine, art, Jazz
- Location: Gainsborough, Lincolnshire
- Contact:
Re: Enough lurking, this is what i can do.
Nice framing, I'm ex-RAF and was thinking of targeting Waddington (so to speak). Perhaps with an ad in the station magazine if they still have one although I am a 40 mins drive from there. We will see.
Alan Huntley
Ashcraft Framing
Bespoke Easels and Self-assembly tray frames
http://www.ashcraftframing.co.uk
Ashcraft Framing
Bespoke Easels and Self-assembly tray frames
http://www.ashcraftframing.co.uk