Meet Learn Celebrate

yasminfrench · Post by **yasminfrench** » Tue 10 Apr, 2012 11:09 am

Hi All!

PhotoWonder (http://www.photo-wonder.com) will be attending Meet Learn Celebrate this year in Elmstree on the 13 & 14th May. If you're interested in learning more about photo restoration and enhancement services or simply want to chat please come and see us at our stand!

Feel free to post below to let everyone know if you'll be there

Martin Harrold · Post by **Martin Harrold** » Tue 24 Apr, 2012 9:29 am

Meet. Learn. Celebrate. and Vote
The Guild Art & Framing Convention 2012
Open to all, members and non-members. No charge except the Awards Dinner.
Sunday May 13 and Monday May 14
Holiday Inn Elstree, WD6 5PU App 3 miles south on Barnet by-pass from Jct 23 of M25

Sunday:
Master Classes from 10am
Business - Jim Anderson
Digital Printing - Toby Herlinger
Museum Mounting Techniques - Louise Vaile
Mountcutting Master Class supported by Keencut
Capacity is limited on some
Visit http://www.fineart.co.uk for info on reserving places at Master Classes

Art & Framing Industry Awards Dinner
Reception 7. Tickets from £54

Monday:
Guild AGM 9.30 Come along to listen, speak if you wish, and vote if you are a member

Seminars from 10.30am
Colour In Framing - David Wilkie
Starting A Gallery & Frame Shop - Neil Duguid
Digital Printing In Your Business - Peter Hayton
Textile & Sports Framing - Mal Reynolds
Blogs and social networking, optimising your business on the Guild website
10 minute one-to-one sessions with Gordon Fong

Open Discussion Groups
For Artists: Copyright and Intellectual Property - Maxwell Roberts
For Framers: Consumer Promotion of Guild Museum and Conservation Mountboard Standards - Martin Harrold

Trade Show Exhibitors Open Sunday 2 - 5 and Monday, 10 - 4:30
Hot Press
Fotospeed
Arqadia
Anne Corless, artist
D&J Simons
PhotoWonder
Valiani
Innova Art
Gunnar
Enormous Art
Lion
Everest, with Pete Bingham
Framiac
Framing Mentor
Colourmount
DesignLine Systems
Framers Corner / Wizard
KC Glass
Ashworth and Thompson
Clinton Banbury / cartoons
Mandev

www.fineart.co.uk

Jonny2morsos · Post by **Jonny2morsos** » Tue 24 Apr, 2012 9:59 am

Are there times for the Monday seminars or do they repeat through the day?

Martin Harrold · Post by **Martin Harrold** » Tue 24 Apr, 2012 10:05 am

I have a PDF with both sides of the MLC Invitation card on one sheet of A4. If someonne can tell me how to post it here, I gladly will do. That has even more detailed info. The Invitation cards will be circulated by exhibitors shortly.

birdman · Post by **birdman** » Tue 24 Apr, 2012 10:17 am

Hi Martin, when you post a reply or start a new thread you should see "Options" and " Upload an attachment" if you scroll down. They should appear underneath the submit button. Select the upload attachment tab and then the choose file button. You should then be able to find the document on your PC, add the file and then submit. Hopefully Robert will then become a relation or "Bob's your Uncle".

Rolf

Martin Harrold · Post by **Martin Harrold** » Tue 24 Apr, 2012 10:48 am

Rolf:
One can never stop learning. Thanks for the guide - I'm not quite sure what I did, but it worked!
Martin

Jonny2morsos · Post by **Jonny2morsos** » Tue 24 Apr, 2012 10:53 am

Thank you Martin. I did ask the FATG the question via email a few weeks back but had no response.

Anyway, now I know and will be there on the Monday. Sunday clashes with a local event we are sponsoring so can't make it.

Steve Goodall · Post by **Steve Goodall** » Tue 24 Apr, 2012 8:14 pm

WOW!!!

Top of the bill listing on exhibitors (looking for a blushing smilie icon)

...or maybe I just booked first

We supported last year & we will be there again for all the "guild gossip"...

Please drop by little our stand for a copy of our NEW 2012 product guide - loads of new stuff etc...

Gesso&Bole · Post by **Gesso&Bole** » Fri 27 Apr, 2012 3:11 pm

Two people I have spoken to this morning have said they didn't think they could go to to MLC because they were not FATG members.

So let me confirm again. Everyone is welcome. The trade show on Sunday afternoon, and all day Monday (see http://www.fineart.co.uk/Awards_Meet_Le ... brate.aspx for the details) is totally free to attend. The Seminars on Monday are also free.

If you want to go to the awards dinner, you have to pay. see http://www.fineart.co.uk/Article/Detail ... 65613C4382

And if you want to attend one of the 2 hour workshops on Sunday, then you also have to pay, although, a heavily susidised rate of £10 for members, and £20 for non-members
http://www.fineart.co.uk/Article/Detail ... 567D5ED193

I will be running a 2 hour MASTERCLASS entitled "10 Ways to Make Your Framing Business More Profitable" Places are limited, so book here to be sure http://www.fineart.co.uk/DynamicEnquiry ... _form.aspx

David · Post by **David** » Tue 08 May, 2012 8:34 pm

I’m down to do the mount cutting master class on Sunday, about half the places have gone so there are places left. I thought you might like to know what I’m planning. At the end of the class you should have produced a mount looking something like this:

: IMG_7257A low res.jpg (208.21 KiB) Viewed 15913 times

This incorporates a number of mount cutting techniques including:
Double Mount
V Groove
Double Offset Corners
Reverse Bevel
Coloured Banner Insert
Outer Mount
Coloured Inlays
Raised Textbox

It’s £20 for non FATG members and £10 for members including materials,
so if you are interested please use the links above for more info or to book.

David.

Bagpuss · Post by **Bagpuss** » Wed 09 May, 2012 8:59 pm

I'll be donning my Hotpress Lanyard on Sunday, I look forward to seeing you all there ; )

Bagpuss / "Adam The Picture Framer"

Steve Goodall · Post by **Steve Goodall** » Wed 09 May, 2012 9:01 pm

Bugga!!!

I better find mine

Martin Harrold · Post by **Martin Harrold** » Thu 10 May, 2012 8:43 am

Here is an advance copy of the hand-out for Meet. Learn. Celebrate. this weekend

markw · Post by **markw** » Wed 16 May, 2012 2:35 pm

How did this event go - did any forum members attend?

Roboframer · Post by **Roboframer** » Wed 16 May, 2012 2:59 pm

I did the Sunday and for me it was good - didn't see Adam (Bagpuss) ^^^^^^^

Gus · Post by **Gus** » Wed 16 May, 2012 3:47 pm

I went on Sunday, did 2 of the sessions -jim's and David's, both excellent and well worth the money. Spent some time talking to Framiac and got a follow up call yesterday which was very helpful.

Some interesting competition pieces. (Awards are listed on the FATG site)

Oh yes, had a chat with robo too - nice to see you back (book me a place on your Mylar session in sept)!

Roboframer · Post by **Roboframer** » Wed 16 May, 2012 4:11 pm

I joined the Guild.

: chairsmiley.gif (912 Bytes) Viewed 15751 times

Merlin · Post by **Merlin** » Wed 16 May, 2012 4:21 pm

I was there Sunday and Monday.

For the FATG and the exhibitors this was not a cheap exercise and I was very disappointed with the number of No Shows (Once Again) .

It will be interesting to see/hear what the number of actual visitors was on the Trade Floor (not counting the awards dinner people), as some of the exhibitors questioned whether it will be worth attending next year.

Martin Harrold · Post by **Martin Harrold** » Thu 24 May, 2012 11:45 am

In reply to John's question about visitor numbers at Meet. Learn. Celebrate, they were, frankly, below expectations. There were app 25% more businesses visiting than came to the first event last year, which is somewhat encouraging.

The attendance level is a puzzle for all concerned, as all the exhibitors put on a great show, and a wide range of training and support at various levels was on offer and quite well attended.

A problem we all face is a general lack of innovation in the industry, so there is currently not too much which is new or exciting to see at any show. CMC's have become widely accepted and used, so apart from the steady development of the software and technical details, there is not even too much new there. If that is compared with the imaging trade, there are new cameras and other hi-tech products being introduced continually, so people in that trade simply have to visit shows and events to keep up with the changes.

In the 'good old days' of the Spring Fair, Hall 3 sometimes had 300+ exhibitors, of which 200+ were art publishers. That side of our industry has changed dramatically. However, having recently been in France and popped into a branch of an art and framing retail chain, http://www.Cadrea.fr, I wonder whether there is a bigger market for middle and lower end art than some realise. (I pose that comment cautiously, as I know almost nothing about art retailing). Certainly, art publishers will be encouraged to exhibit at MLC 2013, with some quite innovative ideas already being discussed.

Given the lack of regular innovation and the fact that it is probably unreasonable to expect most framers and gallery owners to travel more than 100 miles to a trade event, one idea is to alternate MLC between north and south. How would fellow FF members react to the idea of the weekend event being staged in the Yorkshire area in May 2013?

stcstc · Post by **stcstc** » Thu 24 May, 2012 2:16 pm

martin it makes sense

north would be good, BUT somewhere near public transport

i was gonna fly over this year but with it not being near to an airport or trains station etc, was gonna work out expensive

The Framers Forum