Hi folks,
I have a customer with this moulding and she wants us to frame a bunch more in the same moulding.
It started life as a Bare Wood, probably Obeche but who sells it? if any of you know please reply to this.
Thanks in advance
Jamie
Where's this moulding from?
-
jamiesuds
- Posts: 15
- Joined: Sun 20 Jul, 2008 3:39 pm
- Location: Edinburgh, Scotland
- Organisation: Leith Framing Studio Ltd
- Interests: Classic Cars, Winter sports.
- Contact:
Where's this moulding from?
- Attachments
-
- 3 inches wide about an inch deep.
- photo(1).JPG (31.82 KiB) Viewed 5815 times
-
David McCormack
- Posts: 1442
- Joined: Tue 02 Aug, 2011 10:14 am
- Location: South Lakes
- Organisation: Framing
- Interests: Cycling, walking, darkroom photography and laughing a lot!
- Location: Cumbria
- Contact:
Re: Where's this moulding from?
Had a look in the Rose & Hollis catalogue, this one is the right size but not quite your profile.
- DSC_6353.jpg (74.52 KiB) Viewed 5812 times
"You know, there's a right and wrong way to do everything!"
Oliver Hardy.
https://www.instagram.com/davidaustinmccormack/
Oliver Hardy.
https://www.instagram.com/davidaustinmccormack/
-
jamiesuds
- Posts: 15
- Joined: Sun 20 Jul, 2008 3:39 pm
- Location: Edinburgh, Scotland
- Organisation: Leith Framing Studio Ltd
- Interests: Classic Cars, Winter sports.
- Contact:
Re: Where's this moulding from?
Hi David, I should have said the outer edge is just rounded, as in photo below.
- Attachments
-
- Scooped inside edge, rounded outer edge.
- photo(2).JPG (38.96 KiB) Viewed 5810 times
Re: Where's this moulding from?
Not one I have ever seen. Might be a custom-milled profile.
Watch Out. There's A Humphrey About
-
easypopsgcf
- Posts: 365
- Joined: Fri 29 Oct, 2010 11:59 pm
- Location: Glasgow
- Organisation: home
- Interests: cars
Re: Where's this moulding from?
Looks a bit like H505 from FW Holroyd in Glasgow http://www.fwholroyd.com/unfinished/?so ... red&page=2
although it has a square back edge, maybe yours has been rounded by hand/sander?
although it has a square back edge, maybe yours has been rounded by hand/sander?
-
BaBaZa
- Posts: 212
- Joined: Tue 21 Jun, 2005 1:03 pm
- Location: Nottingham
- Organisation: http://www.mainlinemouldings.com
- Interests: Pubs
- Location: Nottingham
- Contact:
Re: Where's this moulding from?
Hi Jamie, the moulding is from Unique Mouldings in Glasgow. Their website is down at the moment.
The code is 423 p/w. Contact Tom: 0141 641 0506
The code is 423 p/w. Contact Tom: 0141 641 0506
Ricky @ Mainline Mouldings Ltd
Twitter #MainlinePolcore
Twitter #MainlinePolcore
-
Unique001
- Posts: 2
- Joined: Fri 24 Aug, 2012 8:20 am
- Location: Glasgow
- Organisation: Unique Wholesale Agencies
- Interests: Golf, Tennis , Travel
Re: Where's this moulding from?
Hi Jamie
Ricky from Mainline Mouldings brought your post to my attention.
The moulding indeed is our 423 p/w, this is available from stock.
Send me your address and i will pop a catalogue in the post?
Regarsd
Tom
Unique Wholesale
Ricky from Mainline Mouldings brought your post to my attention.
The moulding indeed is our 423 p/w, this is available from stock.
Send me your address and i will pop a catalogue in the post?
Regarsd
Tom
Unique Wholesale
-
David McCormack
- Posts: 1442
- Joined: Tue 02 Aug, 2011 10:14 am
- Location: South Lakes
- Organisation: Framing
- Interests: Cycling, walking, darkroom photography and laughing a lot!
- Location: Cumbria
- Contact:
Re: Where's this moulding from?
Hi Tom and welcome. Just sent you a PM 
"You know, there's a right and wrong way to do everything!"
Oliver Hardy.
https://www.instagram.com/davidaustinmccormack/
Oliver Hardy.
https://www.instagram.com/davidaustinmccormack/
-
jamiesuds
- Posts: 15
- Joined: Sun 20 Jul, 2008 3:39 pm
- Location: Edinburgh, Scotland
- Organisation: Leith Framing Studio Ltd
- Interests: Classic Cars, Winter sports.
- Contact:
Re: Where's this moulding from?
Fantastic outcome, I really have to spend more time on this forum.
Many thanks to every one.
Jamie
Many thanks to every one.
Jamie