Is there a a lock on the nut? I've put a hex key in to stop the blade turning, but cannot loosen the nut to remove the blade. I didn't get any tools with the machine
Any help greatly appreciated.
Brevetti Prisma CE Mitre Saw
-
Yo B
- Posts: 1
- Joined: Thu 06 Dec, 2012 9:43 am
- Location: Glasgow
- Organisation: bm framing
- Interests: work, postcard collecting, keeping two Jack Russell dogs amused
Brevetti Prisma CE Mitre Saw
I bought a Brevetti Prisma mitre saw second hand from a framer who closed down. I've managed to get just about everything set up, but having aproblem changing the blades.
Is there a a lock on the nut? I've put a hex key in to stop the blade turning, but cannot loosen the nut to remove the blade. I didn't get any tools with the machine
Any help greatly appreciated.
Is there a a lock on the nut? I've put a hex key in to stop the blade turning, but cannot loosen the nut to remove the blade. I didn't get any tools with the machine
Any help greatly appreciated.
-
prospero
- Posts: 11695
- Joined: Tue 05 Jun, 2007 4:16 pm
- Location: Lincolnshire
Re: Brevetti Prisma CE Mitre Saw
Have you tried a good soaking with WD-40?
Watch Out. There's A Humphrey About
-
China shop
- Posts: 107
- Joined: Sat 22 Mar, 2008 9:27 am
- Location: Middleton
- Organisation: Framing shop & Gallery
- Interests: Sport, framing
- Location: Middleton
Re: Brevetti Prisma CE Mitre Saw
You probably already know this but, One side is a right hand thread and the other side is a left hand thread.
Roger