Page 2 of 3

Re: hotpress , printer and framing equipment for sale

Posted: Fri 20 Nov, 2015 7:29 pm
by Paul Hayward
i dont believe it has the thing you say? we never had any issues with print colours though....we got the printer Mid 2009 ...did they come with that function / option then ?

Re: hotpress , printer and framing equipment for sale

Posted: Fri 20 Nov, 2015 7:49 pm
by IFGL
Yes they did, you could buy it with or without, unfortunately without it, it would not match the output of my other printers, they have to be 100% consistent with each other, I can't use my current i1 with that machine.
Great printer for someone else though, the self diagnostic and clean thing that is not working is not a problem at all, if it prints a clean nozzle test, the sensor will be dirty, that is turned off on my 44" machine.

Re: hotpress , printer and framing equipment for sale

Posted: Fri 20 Nov, 2015 7:55 pm
by Paul Hayward
cheers for the info...i will see if Kat can get some pics up ...im not great at all that stuff...maybe the pictures will help :D

Re: hotpress , printer and framing equipment for sale

Posted: Mon 30 Nov, 2015 4:32 pm
by Paul Hayward
Hotpress printer and cassese cutter all still available ...will consider sensible offers :)

Re: hotpress , printer and framing equipment for sale

Posted: Sun 06 Dec, 2015 8:25 pm
by Paul Hayward
must go ....offers considered...but be nice :D

Re: hotpress , printer and framing equipment for sale

Posted: Sun 13 Dec, 2015 2:44 pm
by Paul Hayward
DSC02566.JPG
DSC02566.JPG (117.95 KiB) Viewed 17736 times
DSC02566.JPG
DSC02566.JPG (117.95 KiB) Viewed 17736 times
DSC02566.JPG
DSC02566.JPG (117.95 KiB) Viewed 17736 times

Re: hotpress , printer and framing equipment for sale

Posted: Sun 13 Dec, 2015 2:50 pm
by Paul Hayward
posted a pic or two to show the excellent condition these items are in ...really have looked after them as best we could and the hotpress really is as new as you will ever find short of ordering a brand spanking new one !!

will try get some pics of the cassese when i can get to it ....but you know what they look like anyway :D :D :lol: :lol:

All 3 items MUST go....they need to find a new home where they will actually be used....and the sooner the better so i can move on with whatevers next....and would like to clear out and finish the house off a bit

someone put em to good use 8)

the Lowest i will take for the printer is £450
the lowest i will take for the Cassese cutter ...has proper 2nd stop (very handy!) and 3 sets of blades! is £750
the lowest i will take for my hotpress is £1250

Re: hotpress , printer and framing equipment for sale

Posted: Wed 16 Dec, 2015 12:15 pm
by IFGL
Sent you a pm

Re: hotpress , printer and framing equipment for sale

Posted: Wed 16 Dec, 2015 12:50 pm
by Paul Hayward
printer sold stc in new year 8)

Just hotpress and cassese CS55 left to go....and eventually a large 3 rier storage unit....and left over tapes etc

Re: hotpress , printer and framing equipment for sale

Posted: Sun 27 Dec, 2015 11:11 am
by Paul Hayward
back to the top...cassese and hotpress still waiting to find a new home ....hope everyones having a good time off :D

Re: hotpress , printer and framing equipment for sale

Posted: Sun 27 Dec, 2015 11:58 am
by IFGL
I am trying to find a reason to buy these as well as the printer, I already have two Hanson choppers and a cassese 939, I barely use the press I have, the prices are very good though, death from the wife is stopping me.

Re: hotpress , printer and framing equipment for sale

Posted: Sun 27 Dec, 2015 9:40 pm
by Paul Hayward
just bring your van n load up :D :lol:

Re: hotpress , printer and framing equipment for sale

Posted: Tue 29 Dec, 2015 12:37 pm
by Paul Hayward
printer now gone...nice to meet you and your dad Darren :D

cassese cutter, hotpress, storage rack and workbench left....gotta go....and the sooner the better now im clearing out :D

do have a load of picture blocks and a wide opening jetmounter i have also decided to sell as well if those are any use for anyone :D

ALL MUST GO!!....someone needs to put these to good use

Re: hotpress , printer and framing equipment for sale

Posted: Tue 29 Dec, 2015 7:10 pm
by IFGL
Cheers Paul!

I have just got home, you will be glad to know Bob got home safely, not a scratch to be seen, I promise to look after him as you have.

Just a side note, anyone looking at purchasing the other equipment left, I can tell you it has been looked after and is in excellent condition.

Re: hotpress , printer and framing equipment for sale

Posted: Thu 31 Dec, 2015 7:03 am
by Derek
anything left?

Re: hotpress , printer and framing equipment for sale

Posted: Thu 31 Dec, 2015 8:47 am
by Paul Hayward
cassese cutter , hotpress , framing bench, 3 tier storage rack , and also loads of photo blocks along with my wide opening jetmounter are still available

what are you after ?...Cheers...Paul

Re: hotpress , printer and framing equipment for sale

Posted: Sat 02 Jan, 2016 8:05 am
by Paul Hayward
new years bump back to the top...all must go... hotpress, cassese cutter work bench , 3 tier storage unit....and a load of photoblocks with a wide opening jet mounter

all must go ...having a good clear out and doing some finishing off of building work :D

Re: hotpress , printer and framing equipment for sale

Posted: Wed 06 Jan, 2016 8:38 pm
by Paul Hayward
DSC02595.JPG
DSC02595.JPG (1.27 MiB) Viewed 17450 times
DSC02602.JPG
DSC02602.JPG (1.39 MiB) Viewed 17450 times
DSC02599.JPG
DSC02599.JPG (1.12 MiB) Viewed 17450 times
DSC02601.JPG
DSC02601.JPG (1.16 MiB) Viewed 17450 times
DSC02597.JPG
DSC02597.JPG (1.18 MiB) Viewed 17450 times
DSC02595.JPG
DSC02595.JPG (1.27 MiB) Viewed 17450 times
DSC02602.JPG
DSC02602.JPG (1.39 MiB) Viewed 17450 times
few pics for you all :D

Re: hotpress , printer and framing equipment for sale

Posted: Wed 06 Jan, 2016 8:49 pm
by Paul Hayward
DSC02604.JPG
DSC02604.JPG (1.21 MiB) Viewed 17449 times
DSC02603.JPG
DSC02603.JPG (1.2 MiB) Viewed 17449 times

Re: hotpress , printer and framing equipment for sale

Posted: Wed 06 Jan, 2016 9:01 pm
by Paul Hayward
few pics to tease you with :D

Hotpress is MINT ....reduced to £1250
Cassese cutter with 3 sets of blades and a very handy 2nd stop! £750

My wide opening jetmounter with 1 full roll of protac emerytex...near enough a full roll or mountfilm ..and a small bit of another film!
ALSO included is about 45 picture blocks!!! £500 NO Offers on this as the blocks alone cost me 1200 plus VAT !!

sizes are

12x12 = 15
16x12 = 2
20x16 = 2
24x24 =10
28.5x19 =7
37x12 = 7

im sure there are others in there too but some may of been previously used....will be stripped of any picture ...once cleaned they can also be used!

Jet mounter , materials and picture blocks are to be sold as one lot £500

you can see in the pics my workbench and 3 tier storage unit...they are £50 each

Hope this little lot is of interest to you all....Happy new year :D