Page 1 of 1
Mountboard selecter cut file
Posted: Fri 18 Oct, 2013 8:24 am
by Jamie
Morning all!
Today i have received a handy mount-board display box from Arqadia.
I want to make my own box to the put the mount board corners in, and wondered if anyone has already done it and would like to share the cut file.
i am using a valiani mat pro ixv. likewise if no one has and i get around to doing it i will upload it.
thanks in advance
Jamie
Re: Mountboard selecter cut file
Posted: Fri 18 Oct, 2013 9:31 am
by Jamie
nEVER MIND I HAVE MADE ONE NOW, JUST NEED TO TEST IT
Re: Mountboard selecter cut file
Posted: Sat 19 Oct, 2013 5:27 am
by Keith Hewitt
One of the best ever innovative mount board caddies I have seen was at SUFEL in Lisbon.
I will post a pic. The caddy is on the edge of the counter where the customer stands.
If necessary can be lifted onto the counter.
If ever you go to Lisbon do visit SUFEL - a most innovative framer,
And if you need a good dinner go to
Solar Dos Presuntos
Excellent food, and the walls and ceilings are covered in 100 's of framed pics which just makes the meal better.
- Rest. Solar Dos Presentos - Lisbon
- Lisbon Solar Dos Presuntos e mail.jpg (56.03 KiB) Viewed 13191 times
- SUFEL MOUNT CADDY
- Portugal + Spain Dec 2011 075 SUFEL - LISBON.jpg (41.55 KiB) Viewed 13191 times
Re: Mountboard selecter cut file
Posted: Sat 19 Oct, 2013 6:56 am
by IFGL
I know you have already done it, but there is probably one already in the box cutting software.
Re: Mountboard selecter cut file
Posted: Sun 20 Oct, 2013 8:13 am
by Steve N
That's nice Keith, but I can see kids knocking that off my counter