putting everything up for sale
Forum rules
All sellers are required to have a forum profile that identifies them clearly. (Such as - name, surname, location, business name et cetera)
All sellers are required to have a forum profile that identifies them clearly. (Such as - name, surname, location, business name et cetera)
-
- Posts: 298
- Joined: Sun 25 Sep, 2011 12:55 pm
- Location: Hertfordshire
- Organisation: Calico Framing
- Interests: Picture framing, fine art
- Location: Bishop's Stortford
- Contact:
putting everything up for sale
Getting out of framing, so everything is for sale.
Morso F + Spare blade (1 old set, 1 barely used new set, 1 never used set) - old machine but in perfect working order
Ultimat Keencut Gold mouncutter + spare blades - excellent condition
Alfamachine Minigraf A2M-200 foot operated underpinner inc. extension wings + spare v nails various sizes - some glue marks on top but in perfect working order, just a couple of years old
Wooden carpenter's workbench, beech wood, 2 vices
Various carpentry tools - chisels, saws, planes (inc. record rebate plane), measuring guage, squares, ...
Large A0 Plan chest - 8 drawers - old and a bit tatty but all drawers work perfectly
Point guns:
Fletcher flexi point
Fletcher framers points
Fletcher multipoint
... all with spare points
Canvas pliers
Kreg jig system + screws
T square - large - polycarbonate (I think) - perfect condition
Toyo glass cutter
Diamond glass seamer
Gum tape dispenser - manual - dispenses set length of tape already wetted
Basic Lion brown tape holder with rollers / water bath
20-30 lengths of unfinished Rose & Hollis moulding, various
Gilding equipment - pad, tips. knife, whiting, RSG, various books of leaf, bole, etc.
Lots of waxes, paints, stains, etc.
Lots of framing books
All sorts of other small sundry items, including tapes, hardware, cord, blades, handywrap, screws, card corners, bubble wrap
EVERYTHING YOU NEED TO GET STARTED AS A FRAMER - can give training for a newcomer interested in taking the lot, including mountcutting, cutting and joining frames, assembly, hinging, cutting / fitting glass, hand finishing, gilding even
Will do great deal for anyone wanting to take the lot.
Based in Bishop's Stortford, collection only for almost all this stuff. Can help load at my end.
MAKE ME AN OFFER!
david@cavettoframes.com
Morso F + Spare blade (1 old set, 1 barely used new set, 1 never used set) - old machine but in perfect working order
Ultimat Keencut Gold mouncutter + spare blades - excellent condition
Alfamachine Minigraf A2M-200 foot operated underpinner inc. extension wings + spare v nails various sizes - some glue marks on top but in perfect working order, just a couple of years old
Wooden carpenter's workbench, beech wood, 2 vices
Various carpentry tools - chisels, saws, planes (inc. record rebate plane), measuring guage, squares, ...
Large A0 Plan chest - 8 drawers - old and a bit tatty but all drawers work perfectly
Point guns:
Fletcher flexi point
Fletcher framers points
Fletcher multipoint
... all with spare points
Canvas pliers
Kreg jig system + screws
T square - large - polycarbonate (I think) - perfect condition
Toyo glass cutter
Diamond glass seamer
Gum tape dispenser - manual - dispenses set length of tape already wetted
Basic Lion brown tape holder with rollers / water bath
20-30 lengths of unfinished Rose & Hollis moulding, various
Gilding equipment - pad, tips. knife, whiting, RSG, various books of leaf, bole, etc.
Lots of waxes, paints, stains, etc.
Lots of framing books
All sorts of other small sundry items, including tapes, hardware, cord, blades, handywrap, screws, card corners, bubble wrap
EVERYTHING YOU NEED TO GET STARTED AS A FRAMER - can give training for a newcomer interested in taking the lot, including mountcutting, cutting and joining frames, assembly, hinging, cutting / fitting glass, hand finishing, gilding even
Will do great deal for anyone wanting to take the lot.
Based in Bishop's Stortford, collection only for almost all this stuff. Can help load at my end.
MAKE ME AN OFFER!
david@cavettoframes.com
-
- Posts: 151
- Joined: Mon 25 Oct, 2010 10:44 am
- Location: Hertfordshire
- Organisation: Not yet.
- Interests: Off road motorcycling; Youth work; Watching sport - motocross; speedway and rugby mainly.
Re: putting everything up for sale
Hi David,
Sorry to hear you are getting out of the framing game. Hope all works out for you in any new ventures you have.
If you decide to split the items I would be interested in the tape wetter/dispenser, and maybe the mouldings and paint/waxes.
Regards
Gus
Sorry to hear you are getting out of the framing game. Hope all works out for you in any new ventures you have.
If you decide to split the items I would be interested in the tape wetter/dispenser, and maybe the mouldings and paint/waxes.
Regards
Gus
-
- Posts: 298
- Joined: Sun 25 Sep, 2011 12:55 pm
- Location: Hertfordshire
- Organisation: Calico Framing
- Interests: Picture framing, fine art
- Location: Bishop's Stortford
- Contact:
Re: putting everything up for sale
Hi Gus
Totally happy to split. Do you want to pop round, see what I've got? As a hand finisher, you might like quite a lot of the odds and sods I've collected. 07776206016.
Best,
David
Totally happy to split. Do you want to pop round, see what I've got? As a hand finisher, you might like quite a lot of the odds and sods I've collected. 07776206016.
Best,
David
-
- Posts: 142
- Joined: Thu 23 May, 2013 11:21 am
- Location: Lancaster/Morecambe
- Organisation: Bay Framing
- Interests: Picture Framing
Football
Music - Location: Lancaster
Re: putting everything up for sale
I'm on the lookout for a morso. Do you have a price in mind for the morso and blades? Tom
Do send me a pm if you dont want to discuss prices in public. Thanks
Do send me a pm if you dont want to discuss prices in public. Thanks
-
- Posts: 298
- Joined: Sun 25 Sep, 2011 12:55 pm
- Location: Hertfordshire
- Organisation: Calico Framing
- Interests: Picture framing, fine art
- Location: Bishop's Stortford
- Contact:
-
- Posts: 101
- Joined: Mon 09 Apr, 2012 1:59 pm
- Location: Southwest
- Organisation: N/a
- Interests: Framing
Re: putting everything up for sale
Please could you let me know how much you are looking at for the Ultimat Gold?
Thanks
Thanks
-
- Posts: 151
- Joined: Mon 17 Dec, 2012 12:22 am
- Location: St. Andrews
- Organisation: Elite Framing
- Interests: Cars, framing
Re: putting everything up for sale
Could you let me know if you have a price in mind for your point guns and keencut gold
-
- Posts: 298
- Joined: Sun 25 Sep, 2011 12:55 pm
- Location: Hertfordshire
- Organisation: Calico Framing
- Interests: Picture framing, fine art
- Location: Bishop's Stortford
- Contact:
Re: putting everything up for sale
I think £500 for the keencut gold is a fair price, it's not seen that much use and is in perfect working order. If you're interested please make me an offer.
Point guns? £30 each for the framers point gun, flexipoint gun and multipoint. Please note that postage would be extra.
Point guns? £30 each for the framers point gun, flexipoint gun and multipoint. Please note that postage would be extra.
-
- Posts: 298
- Joined: Sun 25 Sep, 2011 12:55 pm
- Location: Hertfordshire
- Organisation: Calico Framing
- Interests: Picture framing, fine art
- Location: Bishop's Stortford
- Contact:
Re: putting everything up for sale
just to clarify the Keencut is the 48" model
-
- Posts: 617
- Joined: Tue 23 Jul, 2013 8:56 am
- Location: Bradford
- Organisation: Kwik Picture Framing
- Interests: Picture framing
Making just that little bit of difference to someone, somewhere. - Location: West Yorkshire
Re: putting everything up for sale
Hi how much for the Morso?
-
- Posts: 20
- Joined: Fri 08 Nov, 2013 8:24 pm
- Location: Manchester
- Organisation: CTS
- Interests: Photography
Re: putting everything up for sale
How much for the flexi guns?
-
- Posts: 118
- Joined: Wed 27 Jul, 2011 5:25 pm
- Location: Western Isles
- Organisation: Lindan House, Aird Tong, Isle of Lewis
- Interests: Photography, printmaking, sailing, poetry, building half models
Re: putting everything up for sale
Hello,
I would like the Fletcher, hard point gun, if still available
Colin
I would like the Fletcher, hard point gun, if still available
Colin
-
- Posts: 298
- Joined: Sun 25 Sep, 2011 12:55 pm
- Location: Hertfordshire
- Organisation: Calico Framing
- Interests: Picture framing, fine art
- Location: Bishop's Stortford
- Contact:
Re: putting everything up for sale
Morso is sold now
Guns look like they'll be sold shortly
Keencut Ultimat 48" still available at present - £500
also
Alfamachine Minigraf A2M-200 foot operated underpinner - £300
Both machines in perfect working order, neither has seen that much use to be honest.
And still have moulding available plus sundry other items.
Guns look like they'll be sold shortly
Keencut Ultimat 48" still available at present - £500
also
Alfamachine Minigraf A2M-200 foot operated underpinner - £300
Both machines in perfect working order, neither has seen that much use to be honest.
And still have moulding available plus sundry other items.
- IFGL
- Posts: 3087
- Joined: Sun 06 May, 2012 5:27 pm
- Location: Sheffield UK
- Organisation: Inframe Gallery Ltd
- Interests: Films ,music and art, my wife and kids are pretty cool too.
- Location: Sheffield
- Contact:
Re: putting everything up for sale
that is very very cheap for the under pinner.
-
- Posts: 298
- Joined: Sun 25 Sep, 2011 12:55 pm
- Location: Hertfordshire
- Organisation: Calico Framing
- Interests: Picture framing, fine art
- Location: Bishop's Stortford
- Contact:
Re: putting everything up for sale
yes, it's very cheap! I just want to get rid of this stuff now and get on with other things.
The underpinner is only a couple of years old, and apart from a few cosmetic signs of wear it's in perfect condition. It's a pleasure to use - once you get used to it loading the v nails is quick enough - and you can really feel when the nail has driven home, I find that really helpful. And it's a really well made machine, rock solid. Plus I've got spare v nails aplenty.
They cost £600 new.
This is a TOTAL BARGAIN!!!
The underpinner is only a couple of years old, and apart from a few cosmetic signs of wear it's in perfect condition. It's a pleasure to use - once you get used to it loading the v nails is quick enough - and you can really feel when the nail has driven home, I find that really helpful. And it's a really well made machine, rock solid. Plus I've got spare v nails aplenty.
They cost £600 new.
This is a TOTAL BARGAIN!!!
-
- Posts: 298
- Joined: Sun 25 Sep, 2011 12:55 pm
- Location: Hertfordshire
- Organisation: Calico Framing
- Interests: Picture framing, fine art
- Location: Bishop's Stortford
- Contact:
Re: putting everything up for sale
Steel band clamp also for sale. Big, strong, springy - perfect for gluing up frames. £25 + postage
-
- Posts: 298
- Joined: Sun 25 Sep, 2011 12:55 pm
- Location: Hertfordshire
- Organisation: Calico Framing
- Interests: Picture framing, fine art
- Location: Bishop's Stortford
- Contact:
Re: putting everything up for sale
And another thing...
Record 042 rebate plane - £100
This is an amazing tool for anyone needing to modify mouldings, in particular creating new or widening existing rebates. A real pleasure to use, Record is the brand you want for this sort of thing.
Record 042 rebate plane - £100
This is an amazing tool for anyone needing to modify mouldings, in particular creating new or widening existing rebates. A real pleasure to use, Record is the brand you want for this sort of thing.
-
- Posts: 298
- Joined: Sun 25 Sep, 2011 12:55 pm
- Location: Hertfordshire
- Organisation: Calico Framing
- Interests: Picture framing, fine art
- Location: Bishop's Stortford
- Contact:
Re: putting everything up for sale
I still have quite a lot of full length raw wood mouldings for sale if anyone's interested. Can do a great price if you're interested in taking the lot. Must be 30 lengths or so, probably cost me £500+. Mostly obeche, quite a bit of ash and some oak. All good stuff.
-
- Posts: 13
- Joined: Wed 22 Jan, 2014 5:23 pm
- Location: Maidstone
- Organisation: Jan Wilson Art
- Interests: Art and textile craft
Re: putting everything up for sale
Hi David. Do you still have the plan chest? If so, could you give me a price and also the outer dimensions. (Would have to collect in back of estate car).
Thanks
Jan
Thanks
Jan