The Framers Forum

Can anybody recommend a good place to send off my Morso blades for sharpening?

Looking for a good job, one of the blades has a very small chip in it which will need to be ground out

Thanks

Steve

You really need someone one with a proper Morso hollow ground machine. My recommendation would probably have to be Mainline. You will have to send them away but you will know that they will come back very sharp.

Lion also have a post away service. Beware extra costs for damage though, but it will be done properly. https://www.lionpic.co.uk/guillotine-blade-sharpening/

Thanks for the recommendations, I have a couple of options here

Thanks

Steve

Thanks for the recommendations, I have a couple of options here

Thanks

Steve

I use Lion as well. The last set of blades sharpened by lion have been on my machine for more than a year and are still sharp. They use liquid coolant while grinding the blades sharp and I assume that this explains how long my blades have lasted. BTW, I cut quite a lot of oak moulding too!

Thanks Mark that's good to know

Steve

Thanks Mark that's good to know

Steve

Wessex also do a blade sharpening service