Page 1 of 1
Fences
Posted: Wed 23 Nov, 2016 12:56 pm
by JohnBruce
I recently moved the angle of the fences on my Morso frame guillotine and moved them back to cut 45deg angles, however when I try to join the frame together I have gaps...how con I set up for perfect 45 deg angles to eliminate this. Any help would be appreciated.
Re: Fences
Posted: Wed 23 Nov, 2016 1:51 pm
by Steve N
Welcome to the forum John, try this thread
http://theframersforum.com/viewtopic.ph ... 0&p=105568
also you can use the search on the forum , such as Morso adjustment
Re: Fences
Posted: Wed 23 Nov, 2016 3:07 pm
by prospero
99% of all Morso problems can be resolved by searching for "Left Fence Tweak" or similar.
Re: Fences
Posted: Thu 24 Nov, 2016 4:49 pm
by JohnBruce
Thank you to prospero and Steve N for your tips on where to look, angles have a smidgen of a gap now which I can live with.