The Framers Forum

Trusty Fletcher 1000 oval and circular mount and glass cutter cuts from 65mm to 520mm. Complete with instruction manual, spare blades and glass cutting wheel.

Gives you a capability for oval mounts without the expense of a CMC!!!

£150

For those that might be engineering oriented, this is a tremendously accurate machine and a great value. If you do not own a CMC....jump on this!

All the major manual manufacturers have dropped their oval mount cutters - Fletcher-Terry, Keen-Cut, C&H, Valiani... but this was the only manual machine where the blade TRACKED during the cut staying perfectly tangent to the center of the Oval producing results equal or better than a CMC. This is fact.

The pictures BTW look like the machine is in excellent condition for this machine. The F-1000 was upgraded to the F-1100 (virtually identical).

John

Thanks for the input John
Kim

Hi, i would be really interested in this if it is still available? Do you know if you can still get the glass wheels and cutting blades? Would i be able to come and see it? Thanks

Hi , Have about 2/3 box of blades and assume that the cutting wheels are available readily although I haven't needed to replace it. Yes you can see and have a quick demonstration although we are some distance away from you. Give me a call on 01547 540593

Hi. Afraid I have lost my voice so unable to call! I will be travelling back down the m5 on Sunday afternoon and wondered if I could stop by if you would be around. Thanks

Now gone to a new home!!