Page 1 of 1
General name of moulding
Posted: Sun 26 Mar, 2017 1:25 pm
by Benhen
Is there a generic name for this classical shape (see attachment)?
The closest seems to be Greek Scotia, but perhaps there is a more modern and specific name.
With thanks for any help.
Re: General name of moulding
Posted: Sun 26 Mar, 2017 2:29 pm
by David McCormack
Scoop! See
The Framing Oracle for other moulding names
- scoop.jpg (3.28 KiB) Viewed 3806 times
Re: General name of moulding
Posted: Sun 26 Mar, 2017 2:45 pm
by prospero
Begging to differ, I wouldn't call it a scoop as it doesn't have a scoopy bit as such.
I'd call it Swept.
Re: General name of moulding
Posted: Sun 26 Mar, 2017 2:59 pm
by David McCormack
Re: General name of moulding
Posted: Sun 26 Mar, 2017 3:44 pm
by prospero
Re: General name of moulding
Posted: Sun 26 Mar, 2017 9:29 pm
by Benhen
Thanks. Googling 'swept' seems to direct one to this (2nd attachment). But also there is one image of the sort of shark's fin shape I am after. (Top right 1st attachment)
Re: General name of moulding
Posted: Mon 27 Mar, 2017 7:25 am
by prospero
The term 'swept' has become synonymous with frames with ornaments on the corners.
This is slightly confusing. A lot of ornate corner frames use a swept profile as a base,
then the sides are scooped out and rope mouldings applied etc. But you could have a
swept frame without any ornaments.
You can also have other profiles with applied ornaments and people would call them
'swept' frames, but technically they aren't.
It's the same with a lot of framing terminology. "I hear what you say but I know what you mean".