Recently bought a second hand Hotpress 220, all arrived in perfect condition until...I stood on the power cable taking it into my workshop..
Having difficulty working what exactly it is I need to buy, what type of cable/power supply it is and where to buy a replacement, can it be completely removed from the pump itself or do I need to repair just the broken end? if anyone has any pointers I would greatly appreciate them!!
Photos below!
Martin,
Hotpress Power Cable
-
- Posts: 30
- Joined: Sun 14 Jan, 2018 10:44 am
- Location: Glasgow
- Organisation: Martin Baister
- Interests: oil painting, photography, framing
Hotpress Power Cable
- Attachments
-
- Hotpress Power Cable 2
- IMG_5345.JPG (97.99 KiB) Viewed 3673 times
-
- Hotpress Power Cable 1
- IMG_5347.JPG (87.45 KiB) Viewed 3673 times
-
- Posts: 378
- Joined: Wed 25 Feb, 2009 7:56 pm
- Location: borehamwood
- Organisation: Icon Framers Ltd
- Interests: football,fishing
Re: Hotpress Power Cable
I would open the broken plastic plug and try to repair it as once its plugged in the press you wont have to take it out again as you turn the power on and off from the wall if required,
Dave
Dave
Dave
www.iconframers.com/
www.iconframers.com/
- Tudor Rose
- Posts: 1127
- Joined: Wed 10 Mar, 2010 4:07 pm
- Location: Dawlish, South Devon
- Organisation: The Framing Lot
- Interests: Tudor history, swimming, walking and needlework.
- Contact:
Re: Hotpress Power Cable
https://www.wessexpictures.com/wessex_p ... ranch.html
Give Steve Goodall a call at Wessex Oldham branch ^^^ - he's the expert on all things Hot Press.
Give Steve Goodall a call at Wessex Oldham branch ^^^ - he's the expert on all things Hot Press.
Jo Palmer GCF(APF) Adv
Textile, Mount Design & Function & Conservation
Forum Moderator & Framing Educator
www.pictureframingtraining.com
Guild Certified Examiner & Guild Accredited Trainer
Guild Chair & Master May 2019 to May 2022
Textile, Mount Design & Function & Conservation
Forum Moderator & Framing Educator
www.pictureframingtraining.com
Guild Certified Examiner & Guild Accredited Trainer
Guild Chair & Master May 2019 to May 2022
-
- Posts: 1899
- Joined: Sat 26 Sep, 2015 8:48 am
- Location: West Wales
- Organisation: George The Framer LLP
- Interests: Gardening, design, electronic music, good food and beverages.
- Contact:
Re: Hotpress Power Cable
Steve will probably say ring Hotpress/Drytac in Bristol and ask to speak to Clive in the basement. He builds and repairs all of the Hotpresses. Clive is da man!
Justin George GCF(APF)
Insta: georgetheframer
Insta: georgetheframer
-
- Posts: 30
- Joined: Sun 14 Jan, 2018 10:44 am
- Location: Glasgow
- Organisation: Martin Baister
- Interests: oil painting, photography, framing
Re: Hotpress Power Cable
Cheers for the pointers, been in touch with Clive. Good contact so thanks for the advice.
-
- Posts: 62
- Joined: Fri 29 Sep, 2017 1:28 pm
- Location: Salisbury
- Organisation: Fisherton Framing
- Interests: Photography, Art, Engineering, Travel
Re: Hotpress Power Cable
This is a right angled male IEC connector. It's a standard connector and easy to replace.
https://www.amazon.co.uk/Male-Side-Righ ... B008O269C4
https://www.amazon.co.uk/Male-Side-Righ ... B008O269C4