Morso Set Up - Thanks
Posted: Wed 15 Jan, 2020 5:47 pm
I just wanted to say thanks to all those who over the years have provided advice and guidance on this forum.
I recently had morso blades sharpened and after fitting was starting to get frustrated with my Cassese CS1 and gaps in joints after gluing and underpinning.
I was looking at splashing out to upgrade underpinner when I did a search on the forum for Morso set up advice and found lots of great stuff, especially around adjusting the left fence. I had used a straight edge to get everything aligned and it turns out that this was now causing a problem. Having now played with small adjustments to the left fence I have now managed to get tight closed corners, so no need to throw out the underpinner.
So wanted to say thanks to those who take time out to answer questions, now been learning lots on hand finishing and will be giving that a go in coming weeks.
Cheers
Tom
I recently had morso blades sharpened and after fitting was starting to get frustrated with my Cassese CS1 and gaps in joints after gluing and underpinning.
I was looking at splashing out to upgrade underpinner when I did a search on the forum for Morso set up advice and found lots of great stuff, especially around adjusting the left fence. I had used a straight edge to get everything aligned and it turns out that this was now causing a problem. Having now played with small adjustments to the left fence I have now managed to get tight closed corners, so no need to throw out the underpinner.
So wanted to say thanks to those who take time out to answer questions, now been learning lots on hand finishing and will be giving that a go in coming weeks.
Cheers
Tom