Pneumatic Morso Mitring Machine for Sale £1395.00
Posted: Sun 02 Feb, 2020 12:56 pm
Hi all,
I am downsizing my workshop as per my previous posts.
Here I have Pneumatic (air-operated) Morso mitring machine up for sale, it works with the same simple principle as the Morso F, apart from being a pneumatic mitring machine.
For those with bad knees, backs, ankles or dodgy hips (I have two of these conditions), this machine is a cost-effective way of continuing working. Fewer visits to the osteopath, physio or chiropractor. It cuts OAK and ASH with ease, the simultaneous pressing of two buttons means no effort at all.
The Morso H is operated by a secure two-hand release system, which makes it impossible for the fingers to touch the knives while working.
Again, there are no problems with dust, as all the waste will be lead directly into a bin, through the Morso Waste Chute, which is a standard accessory.
The air cylinder that pulls the knives through the workpiece secures an easy and effortless working procedure, and therefore Morso can cope with repetitive work.
Morso H is delivered with safety guard, push-button switch operation, longitudinal stop, measuring scale, adjustable fences (45° - 90°), adjustable rebate supports and waste chute. Also has the left-hand support.
£1395.00
I am based in West Yorkshire BD211SX
email steve_brayshaw@hotmail.com
07779 058051
See a video of the Morso in operation here.
https://www.youtube.com/watch?v=VHkDzIKFov0
I am downsizing my workshop as per my previous posts.
Here I have Pneumatic (air-operated) Morso mitring machine up for sale, it works with the same simple principle as the Morso F, apart from being a pneumatic mitring machine.
For those with bad knees, backs, ankles or dodgy hips (I have two of these conditions), this machine is a cost-effective way of continuing working. Fewer visits to the osteopath, physio or chiropractor. It cuts OAK and ASH with ease, the simultaneous pressing of two buttons means no effort at all.
The Morso H is operated by a secure two-hand release system, which makes it impossible for the fingers to touch the knives while working.
Again, there are no problems with dust, as all the waste will be lead directly into a bin, through the Morso Waste Chute, which is a standard accessory.
The air cylinder that pulls the knives through the workpiece secures an easy and effortless working procedure, and therefore Morso can cope with repetitive work.
Morso H is delivered with safety guard, push-button switch operation, longitudinal stop, measuring scale, adjustable fences (45° - 90°), adjustable rebate supports and waste chute. Also has the left-hand support.
£1395.00
I am based in West Yorkshire BD211SX
email steve_brayshaw@hotmail.com
07779 058051
See a video of the Morso in operation here.
https://www.youtube.com/watch?v=VHkDzIKFov0