Page 1 of 1
WANTED - framing equipment / materials for start up
Posted: Mon 18 May, 2020 2:36 pm
by Jag62
Hello all,
I'm seeking framing equipment for my new business set up. I'm after pneumatic underpinner, Keencut Ultimat (pref Gold or Futura), glasscutter, tab gun, accessories, mouldings to get me started. Ideally a package deal with everything would be great. Please message me if you have anything suitable.
Regards,
Neil
Re: WANTED - framing equipment / materials for start up
Posted: Tue 19 May, 2020 8:26 am
by Ablankcanvas
Hi Neil,
We are stopping production of our framing business so have a large amount of stock and machinery for sale. Please see our listings. We are open to offers...
Re: WANTED - framing equipment / materials for start up
Posted: Tue 19 May, 2020 8:41 am
by Jag62
Thanks for the heads up. Excalibur may be of interest if it doesn't get taken. Unfortunately underpinner & drytac out of my price range at present.
Regards,
Neil
Re: WANTED - framing equipment / materials for start up
Posted: Tue 19 May, 2020 6:30 pm
by Crome Gallery
Hi Neil
I have a 3 underpinners and 2 keen cut golds
Morso or a bench mounted one
Loads of moulding to get som practice and get you going
I am based in Norfolk if this is any good let me know
Regards iain
Re: WANTED - framing equipment / materials for start up
Posted: Wed 20 May, 2020 7:13 am
by Jag62
Hi Iain, Thanks for info, I've messaged you.
Regards,
Neil
Re: WANTED - framing equipment / materials for start up
Posted: Wed 20 May, 2020 8:54 am
by Crome Gallery
Images below
Re: WANTED - framing equipment / materials for start up
Posted: Wed 20 May, 2020 8:59 am
by Crome Gallery
The alfamachine minigraf 4 £700
Cassese cs830 £300
Gielle £400
Morso £750
Bench mounted miter £195
Keen cut gold £450
I will get better photos of the ones your interested in
Regards iain
Re: WANTED - framing equipment / materials for start up
Posted: Wed 20 May, 2020 10:04 am
by Jag62
Hi Iain,
Interested in the Ultimat. Can you send photos & advise what condition please ?
Regards,
Neil
Re: WANTED - framing equipment / materials for start up
Posted: Wed 20 May, 2020 10:21 am
by Lescliff
I have a complete framing business to sell. Based in Bolton, Framearound, thirty five years in business, selling due to retirement.
Re: WANTED - framing equipment / materials for start up
Posted: Wed 20 May, 2020 10:26 am
by Jag62
Hi Les,
Please send me a message with details, prices, etc.
Regards,
Neil
Re: WANTED - framing equipment / materials for start up
Posted: Wed 20 May, 2020 10:39 am
by Lescliff
Framearound business for sale at a very good price for the right person wishing to continue with this successful business. In need of some updating and moving forward with computer and intrernet sales. There is a very good customer base both retail, commercial, local municipal art gallery,.
Framearound has a number of chevron towers, Neilsen brand six sided and some larger continental double sided split level display chevron stands for sale. Also four double sided easels each holding four pictures ideal for window displays. A number of low level browsers and hundreds of quality framed art works. Swept frames for sale and greeting card.
Framearound is a guild Commended framer of thirty-five years in business .
We close down at Christmas so machinery is still in use till then but will consider selling it if no interest in buying a business . Please email me back or message me on here. Based in Bolton Lancashire UK.
framearound@googlemail.com
thank you. Les Cliff owner
Re: WANTED - framing equipment / materials for start up
Posted: Wed 20 May, 2020 11:23 am
by Lescliff
Jag62 wrote: Wed 20 May, 2020 10:26 am
Hi Les,
Please send me a message with details, prices, etc.
Regards,
Neil
Hi Neil, Initially I am trying to sell the complete business all machinery,stock everything as a package for someone who wants to continue and expand this thirty five year old business.
There is a Morso with a few sets of decent brand new and used blades, an Ultimat gold mount cutter, a Rondo oval cutter, wall mounted Terry Fletcher glass cutter, a cassisse underpinner and compressor plus various airline tools a shrink wrapper basically a complete workshop ,plus moulding and a hundreds of framed artworks prints browsers swept frames.
As I have to retire partially now due to leukemia and reaching 65 I want initially to sell the whole thing as a going concern at a very reasonable price
0f around £35,000 . I have to trade until Dec 24th so cant allow cherry picking until after then only if I cant get a buyer.
I am currently lockdown until most likely July so can`t forward any images till i return to work, but my facebook page of Framearound may well show the gallery and possibly some of the machinery.
many thanks,
Les Cliff BA GCF
Re: WANTED - framing equipment / materials for start up
Posted: Wed 20 May, 2020 12:41 pm
by Crome Gallery
Jag62 wrote: Wed 20 May, 2020 10:04 am
Hi Iain,
Interested in the Ultimat. Can you send photos & advise what condition please ?
Regards,
Neil
Condition is v good and will be serviced
Re: WANTED - framing equipment / materials for start up
Posted: Wed 20 May, 2020 12:42 pm
by Crome Gallery
I can’t get back in to the work shop until Saturday
So will take better photo then for you
Regards iain
Re: WANTED - framing equipment / materials for start up
Posted: Wed 20 May, 2020 3:59 pm
by Bella88
Hi Neil,
I am selling following items and based in Camden, London if you still need any items and want to know more let me know.
Bambi air compressor
Used but in very good condition
BAMBI BB50D
Weight46.0000
Capacity100 Litres/min
DriveDirect
Motor1 HP (0.68 Kw)
Pressure8 Bar
Receiver50 Litres
Voltage240
Flow @ 4 Bar70 Litres/Min
Dimensions55 x 88 x 29 mm (H x W x D)
Noise Level (dBA)42 dB(A)
Compressor Details:
• This compressor has piston rings. This means oil carry over can be experienced.
• This compressor has a 50% duty cycle. This means 10 minutes on, 10 minutes off. Up to a maximum of 30 minutes on, 30 minutes off.
• Not intended for heavy duty use. Should not be used with heavy air tools.
Morso. F.45295 dk 8900randers
Used but in good condition
Cassese underpinner
Underpinner; cassese 486 ultra
Xp a.d. 371 2007.
110 v ou 220v
100w
6bars min 7 bars max
80kg
As well as loads of lengths of moulding of all sorts
Let me know if you're interested in anything
Best wishes.
Re: WANTED - framing equipment / materials for start up
Posted: Thu 21 May, 2020 10:00 am
by Lescliff
Hi Neil, Initially I am trying to sell the complete business all machinery,stock everything as a package for someone who wants to continue and expand this thirty five year old business.
There is a Morso with a few sets of decent brand new and used blades, an Ultimat gold mount cutter, a Rondo oval cutter, wall mounted Terry Fletcher glass cutter, a cassisse underpinner and compressor plus various airline tools a shrink wrapper basically a complete workshop ,plus moulding and a hundreds of framed artworks prints browsers swept frames.
As I have to retire partially now due to leukaemia and reaching 65 I want initially to sell the whole thing as a going concern at a very reasonable price
0f around £35,000 . I have to trade until Dec 24th so cant allow cherry picking until after then only if I cant get a buyer.
I am currently in lockdown until most likely July so can`t forward any images till i return to work, but my facebook page of Framearound may well show the gallery and possibly some of the machinery. But don't hesitate to get in touch if have any questions
Many thanks,
Les Cliff BA GCF