Hot Press Dry mount Vacuum Press
Posted: Tue 30 May, 2023 3:11 pm
HGP 250 Vacuum press.
In good working order all be it an older model. (circa 1995) I replaced the membrane and seals around 8 years ago, along with some internal piping and joints, also fitted a new release valve. Since then the machine has been used 30 times a year in the 1st 5ys (after replacement) and 10 times in total the last 3ys.Theres a knob missing of the temp adjustment - its always been like that since I bought it! I adjust it with a small screwdriver which fits in perfectly.
It takes a standard mountboard 1200 x 815 and pulls a perfectly good vacuum, (as seen on the picture)to do all the jobs I ever attempted. There is a foam blanket and silicone release paper and 1/4 roll dry mount tissue (hot). You can mount with this or use precoated boards.
Buyer collects. Looking for quick sale £350.
New machines of this size are £4k but they haven't made one for 2ys apparently!
Contact Malcolm: 07885434133/info@villageframing.com/PM me here.
[img]
In good working order all be it an older model. (circa 1995) I replaced the membrane and seals around 8 years ago, along with some internal piping and joints, also fitted a new release valve. Since then the machine has been used 30 times a year in the 1st 5ys (after replacement) and 10 times in total the last 3ys.Theres a knob missing of the temp adjustment - its always been like that since I bought it! I adjust it with a small screwdriver which fits in perfectly.
It takes a standard mountboard 1200 x 815 and pulls a perfectly good vacuum, (as seen on the picture)to do all the jobs I ever attempted. There is a foam blanket and silicone release paper and 1/4 roll dry mount tissue (hot). You can mount with this or use precoated boards.
Buyer collects. Looking for quick sale £350.
New machines of this size are £4k but they haven't made one for 2ys apparently!
Contact Malcolm: 07885434133/info@villageframing.com/PM me here.
[img]