Retirement looms and stuff to sell

[YPF]

The time for my retirement is fast approaching, I have already stopped taking any further orders and will close the shop doors on 21 December (maybe even 20 December). Immediately after Christmas I will begin to strip out the shop will have a number of items for sale (all by collection).

First stab at a list of possible sale items is:

2 x Nielsen Bainbridge 8 panel moulding carousels and just under 2.1m tall. They separate into 2 parts for easier transportation. £10.00 each.

Selwyns 5 panel (double sided) wall mounted moulding display, each panel is about 28cm wide x 98cm useable space, with a metal frame that screws to a wall. £20.00

2 x 5 drawer plan chests. Internal drawer sizes are 137cm wide x 79.5cm deep. I have mounted these one on top of the other with a worktop over and incorporated all into my counter/design table. They are not display quality plan chests unless you are adept at some finishing carpentry. £50.00 each.

2 x Stanley 400 mitre vices. I have these as display items but are both in working condition. One of the vices has a piece missing from one of the clamps but this does not prevent use. £50.00 each.

Moulding bundles. Each bundle will have 10 full lengths of same/similar moulding - great for a start up. Not sure of the quantity of bundles yet until I start sorting the stock. £20.00 a bundle – the actual value will far exceed that amount. Moulding from Larsen Juhl, Nielsen Bainbridge, Lion and Centrado

Nielsen Bainbridge aluminium sample display tracks – just screw vertically to a wall and hang any aluminium corner sample on the provided little brackets. I have 4 pieces each about 1.2m long. Free.

I already have homes for the CMC, Morso, Underpinner, Excalibur, Keencut Ultimat, Hot Press and Jet Mounter.

I am happy to provide photos in due course but just ask if you want to see something specific.

Edited - forgot to add we also have some DIY level stuff (used for training) - hand underpinner, Logan mount cutter, Nobex (I think) mitre saw, there may be some other items, will check next week.

[WannabeFramer]

Could I have one of the carousels, if still available please?

[YPF]

Could I have one of the carousels, if still available please?

Yes, of course. I will get the dimensions for each piece later

[YPF]

Carousel dimensions. Top section 60cm wide 102cm high, bottom section 67cm wide 107cm high. Let me know when you would like to collect.

[WannabeFramer]

Thanks, I’ll PM you

[kentish]

Can I have the Selwyns 5 panel please if it’s still available
Nigel

[YPF]

Nigel, yours. Let me know when you would like to collect.

Steve

[YPF]

Addition to the list of items:

Jetmounter, 67cm wide rollers and a part used roll of adhesive.

£200.00

[YPF]

Both moulding carousels have now gone. With time getting tight before I have to vacate the shop now open to sensible offers for the remaining items (including the Jetmounter).

[YPF]

Plan chests now sold.

[YPF]

The only item left is the Jet Mounter - sensible offers accepted. Collection from Worcester.

[Sinerva10]

What does you think it's worth ?

[YPF]

Sinerva10 - have sent you a PM.