The Framers Forum

I purchased a Jetmounter some years ago, and I need some more glossy film for it, but as this is an occasional purchase I can't remember where I previously sourced these - I have a feeling it was Ashworth and Thompson, but can't be sure. Can someone advise me a supplier of this or something similar that would do the same job please.

That is quite an old label, but the basic product specs are as follows...

This is a 50 micron / pressure sensitive / polypropylene or O.P.P. film as the label describes it this is a "standard" gloss - rather than a "high" / "super"/ "Ultra" gloss.

The manufacturer is Drytac and this was branded as a Hot Press product (though it requires no heat and is for use with cold roller laminators).

A good starting point would be to give Drytac a quick call & ask where you can buy rolls of "50 micron / pressure sensitive / polypropylene film"
They will be able to recommend a dealer for you. They are based in Bristol - 0117 958 6500.

Thanks Steve, once again... I'll follow this up.