WANTED - Mat Cutting Pillar Post for Fletcher 8400

[mho]

Hi

I'm after a Mat Cutting pillar post for a fletcher 8400

if anyone has one or knows where i can get one please let me know

cheers

Mark

[Roboframer]

(Could I, in all seriousness, have been expected to resist this ........)

Well, in MHO you could be searching from pillar to post!

Welcome to the Forum Mark!

[mho]

(Could I, in all seriousness, have been expected to resist this ........)

Well, in MHO you could be searching from pillar to post!

Welcome to the Forum Mark!

Not bad for a saturday night.

Thank you its nice to be here.

[Moglet]

He get's better (or maybe worse, depending on one's viewpoint! )

Welcome to you, MHO!

[mho]

Thank you

[Roboframer]

Having always had a Keencut mount cutter and board cutter I've paid little attention to FT topics in the past, but if the service from whoever distributes FT over here is even half as good as Keencut, you're laughing!

Good luck anyway.

[Keith Hewitt]

Hello Mark,

Welcome to TFF

If you go to http://www.lionpic.co.uk and search for a "Mat cutting pillar post" this comes up..

http://www.lionpic.co.uk/Catalog/Produc ... lar%20post

Is this what you want

Good luck with your framing.

[Dermot]

You can get it direct from Fletcher Terry https://www.fletcher-terry.com/phpworx/ ... &find=Find

$22.02 on the site..

Not sure if this search will work here, if not go to the FT site then to the online store search for 8400 and up it pops...

[MITREMAN]

Hi Mho,
If You give My Brother Peter Stanlick at Framers Equipment Northhampton (Flecther Agent) a ring tommorrow morning, he said he has one in stock.

Tel 01604 470333
Mobile 079880660240

http://www.framersequipment.co.uk

Good luck MITREMAN

[Roboframer]

Ta Daaaa!

[mho]

Having always had a Keencut mount cutter and board cutter I've paid little attention to FT topics in the past, but if the service from whoever distributes FT over here is even half as good as Keencut, you're laughing!

Good luck anyway.

I hope they have good spare service. Thanks Roboframer

Hello Mark,

Welcome to TFF

If you go to http://www.lionpic.co.uk and search for a "Mat cutting pillar post" this comes up..

http://www.lionpic.co.uk/Catalog/Produc ... lar%20post

Is this what you want

Good luck with your framing.

Hi Keith, Unfortunately that one doesn't fit the 8400, Thanks for looking though.

You can get it direct from Fletcher Terry https://www.fletcher-terry.com/phpworx/ ... &find=Find

$22.02 on the site..

Not sure if this search will work here, if not go to the FT site then to the online store search for 8400 and up it pops...

Hi Dermot, I did the exact same search and thought i had found it but thats the Glass and Plexi cutting post, (I already have this one) its the Mat cutting pillar post i'm looking for, thanks for looking.

Hi Mho,
If You give My Brother Peter Stanlick at Framers Equipment Northhampton (Flecther Agent) a ring tommorrow morning, he said he has one in stock.

Tel 01604 470333
Mobile 079880660240

http://www.framersequipment.co.uk

Good luck MITREMAN

Hi MITREMAN, I will do that thanks for the details, I will let you know when I have contacted him.



Just like to thank everyone for their help in this matter, I'm new to framing and mounting, I'm just setting myself up a small printing, framing, studio, just small scale for local area, but i'm on a very thight budget as i'm a student at the moment (allbeit a mature one), and as part of my ket I bought a Fletcher 8460 at a very giveaway price, not seen much use, and i'm just reconditioning it, but its missing the Mat Cutting Pillar Post, and I will be wanting to cut foam and Mat board on it.

cheers

Mark

[MITREMAN]

Hi Mho,
Had a laps of memory posted the wrong landline telephone number

Petes Number at Framers Equipment is
01604 790333

Sorry

MITREMAN

[mho]

Hi MITREMAN

I spoke to Peter, He's sorted me out a Mat Cutting Pillar Post and some other parts I needed, they should arrive any day now.

Just like to say thanks, and over the coming days and months I will be reading and participating in the forum.

regards

Mark

[MITREMAN]

Happy To Help

You will find many framers with a wide knowledge on this forum always happy to assist.

Welcome aboard and glad you got sorted.

MITREMAN

[Not your average framer]

I needed to get one for a 8400 I had about seven years ago and Lion had it in stock.

BTW, have you seen the price for the mount cutting blades for this machine! They are not cheap!

Also be very careful when changing the blades not to lose the little screw which fixes the blade to the pillar post. It's an american thread and not easy to replace.

[silvercleave]

Most blades are made by blade manufacturers, have just found blades a lot cheaper here:

http://scalpelsandblades.co.uk/index.php