Wanted Frames - your best price

[upload]

I need 400 approx frames made 8x10"

I dont have the time just now , So if someone can make these at the right price then jobs yours (no silly quotes) . + possible more soon after. Only If i get the right price and my customer gets the price right.

this is the moulding code from Lion ( not sure which one yet)

- M113-18 unless its changed i was paying .77p a meter (with No discount) Menerva black
and
- M107-18 81p a meter (with No discount) Menerva black

Give me a quote for both.

Dont need tabs or backs . Just the frames. Must be tight edge fits. if you cant do that dont bother.

PM me with quotes.

thanks guys.

[silvercleave]

Problem, both out of stock. do you know when it will be available?

[upload]

mmmm dont know..

if they have stock for 200 frames, i could work with that just now.

[silvercleave]

No Stock

[avantime]

If you supply the moulding we would charge £1.40 to cut and pin. Subject to testing the moulding for good joining.

The order could be done in a little over a day.

[avantime]

Just looked at the moulding on the Lion website. I may have 100 or so frames in that moulding in my workshop - we made a few hundred frames for a company that went belly-up (owing me >£600) I have a funny feeling they are in the same moulding!!

I shall check later on today.

[upload]

hi
"If you supply the moulding we would charge £1.40" x 200" = £280.00 just for labour . Sorry i can hire someone for a week for that price using my gear. Sorry Price no good.

[avantime]

Not to worry. I run my machines at between £60 and £100 per hour - big overheads!!

Just checked the workshop and I do indeed have 230 (ish) 10x8" frames made up. The moulding is 23mm wide by 21mm with a slightly rounded front edge. It was from Lion - not sure if it's the same one. As they are out of stock this may help you out.

Open to offers!

[avantime]

See picture below -

I think it is the M113 moulding from Lion. As I said I have about 230 of them (10x8"). When we did the job for the previous customer I charged 90p per frame to cut and join.

If you (or anyone else for thar matter!) wants them then they are £1 a piece! If not they are likely to go in a skip!!

Regards

Hugh

[upload]

how about £200 inc delivery and ill take them, As long as they are not marked or scratched.

[avantime]

90 p a frame plus VAT and delivery. Proforma.