High Volume Underpinner, Wedges, Morso & Compressor
Posted: Mon 09 Aug, 2010 8:18 pm
We are selling the following machine, with Wedges, 100 litre compressor, Morso
The MP is an advanced underpinner from Alfamacchine, the long established Italian manufacturer of quality framing equipment.
The special programmable software allows the operator, for each moulding in your range, to record:
• Position of wedge, up to 9 positions
• Number of wedges inserted in each position
• Speed of wedge insertion
• Size of wedge required
So, when the operator starts with a fresh moulding, they just key in the number, or read a barcode, and the machine automatically makes itself ready. The operator simply has to load the size of wedge indicated (changing the wedge block if necessary) and adjust the top pressure and rebate clamp positions.
Minigraf MP comes complete on stand and with filter / lube / regulator unit.
The optional double top pressure head helps secure wider and more complex moulding profiles.
The MP offers consistent join quality combined with very speedy set-up and operation, all at a very competitive price.
Uses PTM wedges. Needs air and electric supply.
Maximum moulding width: 145mm
Wedge positions: 10 p'n
Operation: Air / PC
Rebate clamp - horizontal
Twin top clamp
Change 'block' for different wedges
Best for: Contract / Volume
Stand: Tilting
This machine is only 5 years old and very good condition.
We are looking £1200 for the Underpinner, approx 300 boxes of various sizes of wedges & 100 litre compressor & Morso
Collection Only
any questions please do not hesistate to contact us on 07838164996
thanks
Suki Marva
The MP is an advanced underpinner from Alfamacchine, the long established Italian manufacturer of quality framing equipment.
The special programmable software allows the operator, for each moulding in your range, to record:
• Position of wedge, up to 9 positions
• Number of wedges inserted in each position
• Speed of wedge insertion
• Size of wedge required
So, when the operator starts with a fresh moulding, they just key in the number, or read a barcode, and the machine automatically makes itself ready. The operator simply has to load the size of wedge indicated (changing the wedge block if necessary) and adjust the top pressure and rebate clamp positions.
Minigraf MP comes complete on stand and with filter / lube / regulator unit.
The optional double top pressure head helps secure wider and more complex moulding profiles.
The MP offers consistent join quality combined with very speedy set-up and operation, all at a very competitive price.
Uses PTM wedges. Needs air and electric supply.
Maximum moulding width: 145mm
Wedge positions: 10 p'n
Operation: Air / PC
Rebate clamp - horizontal
Twin top clamp
Change 'block' for different wedges
Best for: Contract / Volume
Stand: Tilting
This machine is only 5 years old and very good condition.
We are looking £1200 for the Underpinner, approx 300 boxes of various sizes of wedges & 100 litre compressor & Morso
Collection Only
any questions please do not hesistate to contact us on 07838164996
thanks
Suki Marva