Morso for sale
Posted: Fri 28 Oct, 2011 10:53 am
- PA140092.JPG (78.94 KiB) Viewed 1004 times
- PA140098.JPG (79.69 KiB) Viewed 1004 times
- PA140097.JPG (84.06 KiB) Viewed 1004 times
- PA140096.JPG (76.41 KiB) Viewed 1004 times
- PA140093.JPG (79.57 KiB) Viewed 1004 times
garage. There is a light surface bloom of rust on the non moving
surfaces, nothing that a bit of wire wool and half an hour won't sort
out. Moving surfaces are well lubed, so fine.
Blades are currently removed for safety, but no problem, a freshly
ground set will be included. Also included, but not in photos is the
measuring scale and left hand arm attachment. Have included a photo of
the side of the foot pedal, the amount of slotting on these holes is an
indicator as to the amount of work a morso has done in its life, these
are still almost perfectly round. It's a good machine which I had as a
spare at home which I've now replaced with a pneumatic m/c for cutting
the really chunky frames and saving my back. I have checked the serial
number some time ago and from memory this machine was made in the mid
80s, but it's use has been very light and in perfect working order. Any
questions, feel free.