Hi, we have a problem with one of our cassese 3099ultra underpinners. When i try to pin a frame the hammer comes up four times in quick succession but fails to add one pin, i don't understand this as its only supposed to add two pins in the first location anyway? any help would be much appreciated.
Thanks Brian
cassese underpinner will not pin
-
MITREMAN
- Posts: 547
- Joined: Thu 07 Feb, 2008 8:05 pm
- Location: Norwich, Norfolk
- Organisation: Framers Equipment Ltd
- Interests: Conservation & box Framing memorabilia, Fishing, Sports, Keeping fit & healthy, Supporting Southend United, Computing, Cooking, Ale drinking (Camra Member), Eating out, films, Music and Concerts, DIY, Socialising, Walking, Holidays, Forest School, Wood Carving, Grandchildren and anything else I can fit in.
- Location: Northampton
- Contact:
Re: cassese underpinner will not pin
Hi Brian,
Contact Peter Stanlick @ FEL Cassese service engineer
http://www.framersequipment.co.uk
Mobile 07980 660240
Mitreman
Contact Peter Stanlick @ FEL Cassese service engineer
http://www.framersequipment.co.uk
Mobile 07980 660240
Mitreman
MITREMAN
Jan Stanlick GCF Picture Framing Consultant & Teacher
Working in association with Framers Equipment Ltd, Northampton http://www.framersequipment.co.uk
Jan Stanlick GCF Picture Framing Consultant & Teacher
Working in association with Framers Equipment Ltd, Northampton http://www.framersequipment.co.uk
-
JFeig
- Posts: 1393
- Joined: Thu 23 Sep, 2004 8:31 pm
- Location: Detroit, Michigan USA
- Organisation: minoxy, LLC
- Interests: non-fiction knowledge
- Contact:
Re: cassese underpinner will not pin
Two questions
1. is the air pressure up to the recommended pressure?
2. have you been lubricating the o-rings of the foot valve with pneumatic oil? They do dry out.
1. is the air pressure up to the recommended pressure?
2. have you been lubricating the o-rings of the foot valve with pneumatic oil? They do dry out.
Jerome Feig CPF®
http://www.minoxy.com
http://www.minoxy.com
-
brian_uk1
- Posts: 5
- Joined: Fri 17 Mar, 2017 3:18 pm
- Location: england uk
- Organisation: premier image services
- Interests: photography
Re: cassese underpinner will not pin
Hi thank you for your replies, I managed to find the fault yesterday, there is a rectangle thing close to where you adjust the air pressure which has a black box with a wire coming from it screwed to the bottom with a plastic nut thing, the nut had fell off and the black box had slipped off of a copper cylinder. I screwed it back on and it's now working again.
Thanks for taking time to help.
Brian
Thanks for taking time to help.
Brian