The Framers Forum

as I understand things, and if you are of a mind to then you can nominate Facebook friends to take control of your Facebook page in the event of your death, there is a process for this on Facebook. I guess an alternative would be simply to supply a trusted friend with all your login credentials and ...

if you are going to stick it to ply or mdf, it is a good idea to stick a piece of canvas (ideally the same weight) to the reverse of the board. This is called a balancer and will counteract any bending of the board due to sticking two pieces of together and absorbing moisture at different rates. thi...

You can also look at the edges, cutting wheels leave a sawtooth type mark, this will be the side that was scored, and therefore the uncoated side

Find these in junk shops and flea markets, stick a piece of mountboard on the bottom

Have not been there for a couple of years. When I did they were very helpful the show room is massive, the variety huge, they make many of their own mouldings on site. They did not have a published price list, but were happy to print off anything I was interested in. I would strongly recommend you v...

Have you tried moldartpóvoa in Porto?

They have a good range of stock.

Do you have a maintenance department or janitor. They would most likely have something that fits.

If you log onto your service providers website and register there they should have an option to send text merssage from your client area.

or these

https://www.ukpictureframingsupplies.co ... -252-p.asp

Are you intending to hang the frames yourself? If you are I would strongly advise against this. There are all sorts of issues regarding public liability and health and safety when working in public areas. there are many companies that do this type of thing and it is best to contact them and pass on ...

Always used normal

Its true about the waste transport

We recycled board and bits of perspex etc to local schools until a man from the council turned up threatening prosecution for us and them for illegal transportation of trade waste.

got around it by issuing an invoice for £1.00, then it was selling so no problem

started a similar topic a while ago, may help

http://theframersforum.com/viewtopic.php?f=11&t=3347

you will need to scroll down a bit to get to the part that is of interest to you

These are good too

https://www.lionpic.co.uk/hardware-supp ... llers.aspx

JPP are a supplier only, useful to know of for boards and papers, but they do not cut mounts

http://www.johnpurcell.net/herimusMT.html

check ref HEMW5

or you could get one of these

http://www.axminster.co.uk/axminster-fo ... ler-stands

Have used similar for 20 years no problem

you have been liked

Good luck

John Purcell Paper do a museum board 162 x 218 cms, but only in white

http://www.johnpurcell.net/herimusMT.html

And they are not far from you